477350
10
Zoom out
Zoom in
Previous page
1/68
Next page
10
Alarm Operation
The device has a dual alarm timer. (alarm 1 and alarm 2). You can set the two alarm times
individually.
When the device is OFF (Standby mode):
Setting the alarm time
1. Press and hold the ALM 1 (2) button entering alarm setting mode.
2. Press the TUN
/ button to set alarm hour.
3. Press the VOL
/ button to set alarm minute.
Select wake up alarm source
4. Press the ALM 1 (2) button again entering alarm source setting mode.
5. Press the VOL / button to select alarm source BUZZER, iPod/iPhone or RADIO.
Save settings and activate alarm
6. To save all settings and exit the setting mode, press the ALM 1 (2) button or wait for a few
seconds.
7. To activate the daily alarm, press the ALM 1 (2) button and the corresponding alarm source
LED indicator ( AL 1 / AL 2 ) appears on the display.
Notes:
If "Wake with iPod" is selected but your iPod has not been docked, the alarm source will be
redirected to the Alarm Buzzer automatically when the alarm time is reached.
When "Wake with Radio" is selected, make sure the radio station which you want to wake
up with to is tuned.
Wake to Buzzer
When the alarm time is reached, the buzzer alarm will sound for 1 Minute. If no further
button will be pressed, the alarm will go into “snooze” mode.
The buzzer turns off for around 10 minutes and then will sound again. This cyclus will be
repeated 5 times. After the sixth alarm is finished, the alarm will shut off until the same
alarm time on the next day.
You may also activate the snooze function manually after the alarm sounds by pressing the
SNOOZE button. The buzzer stops during the snooze time (around 10 minutes) and then
will sound again.
To cancel the snooze before it expires, press the ALM 1 (2) button.
The snooze operation (including auto-snooze and manual snooze) can be repeated five
times within 50 minutes from the set alarm time.
To stop the alarm immediately after the buzzer sounds, you can also press the ALM 1 (2)
button. It will be active again the following day. (The alarm source LED indicator ( AL 1 / AL
2 ) is visual on the display).
Wake to iPod/iPhone or Radio
When the alarm time is reached, the selected alarm source (iPod/iPhone or Radio) will
automatically turn on. It starts softly and gradually becomes louder.
It plays for 60 minutes then shuts off and resets itself for the following day.
During the activation of the alarm source, you may press the SNOOZE button to activate
the snooze function. The alarm stops for the snooze time (around 10 minutes) then turns on
again.
To cancel the snooze before it expires, press the ALM 1 (2) button.
This manual snooze operation can be repeated five times within 50 minutes from the set
alarm time. Each time the alarm turns on, it plays for 60 minutes (without pressing the
snooze button).
To stop the alarm immediately after the alarm sounds, you may also press the ALM 1 (2)
button. It resets itself for the following day.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco IPT-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco IPT-6 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info