477342

Lenco IPD-4600 Manual

11
Zoom out
Zoom in
Previous page
1/88
Next page
Recalling Preset Station
to turn on the unit.
2. To select FM radio mode, press the FUNC button on main unit (or the RADIO
button on remote cotrol) repeatedly until the radio indicator "FM" is shown on the
LCD display.
3. To select desired preset station, press the CH +/- button.
Different radio broadcast region/country
In case the unit is moved to different country/region with slightly different radio broadcast
system, the unit allows you to select Europe, Japan, Australia or USA system.
Frequency RangeCountry / Region
Europe (EUR) FM 87.5 - 108 MHz, 0.05MHz tuning step
FM 76.0 - 90 MHz, 0.1MHz tuning step
FM 87.5 - 108 MHz, 0.05MHz tuning step
FM 87.5 - 108 MHz, 0.10MHz tuning step
Japan (JAP)
Australia (AUS)
USA (USA)
Listening to an External Audio Source
1. Press the button on main unit or press STANDBY button on remote control
11
2.
3
.
To exit auto-search mode, press the MEM button.
Each time a strong radio station signal is received, it automatically memorizes the
Note:
Number of Channel may be stored less than 20 which after the unit scanned
radio stations frequency Channel 01 to 20.
the frequencry band once.
1. When the unit is in power off mode, press the remote control SET button
repeatedly until the display shows the blinking “EUR”(Europe), “JAP”(Japan), “AUS”
(Australia) or “USA” AREA indicator.
2. Press the Up / Down button from the remote control to select one of the
broadcasting system.
3. To save the settings and exit the setting mode, wait for few seconds or press the SET
button from the remote control.
Auto-Preset
1. Press the MEM button until the frequency digits on display begins to scan then
release the button.The unit starts auto-searching frequency of radio station.
1. Connect an audio cable with 3.5mm stereo plug from an auxiliary audio device to the
AUX/LINE IN jack of the unit.
2. Press the button on main unit or press STANDBY button on remote control to
turn on the unit.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco IPD-4600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco IPD-4600 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 5,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info