477341

Lenco IPD-4500 Manual

9
Zoom out
Zoom in
Previous page
1/10
Next page
Specifications of the system
The outstanding sound quality of the IPD-4500 is the result of our excellent design, the use of special
high-fidelity loudspeakers, an entirely new equalizing circuit, patented bass boost technology, and also a
perfect combination of the following specifications:
Power output: ≥ 3 W*2 (10% distortion, 1 KHz)
Impedance: 8 Ω
Speaker units: 1.5" full-range speaker * 2
Troubleshooting
Problem Possible cause Solution
AC receptacle is not functioning
or is not on.
Plug another device into the AC
receptacle to confirm the AC
receptacle is working, and mare sure
the AC receptacle is switched on.
The universal power supply cord
has not been connected to the
AC receptacle, and/or the power
supply connector has not been
plugged into the power supply
jack on the operating panel of
the IPD-4500 system.
Plug the power supply plug into the
AC receptacle and plug the power
supply connector into the power
supply jack.
The power indicator
light is not on (when
using AC)
Power switch is not set to the
“ON” position.
Slide the power switch to the “ON”
position.
Problem Possible cause Solution
Press the “+” button to increase the
volume.
Volume is set too low.
Check volume level on alternate audio
source device and set at mid-level.
iPod®/iPhone® is not seated into
the docking station properly.
Remove iPod®/iPhone® and re-seat it
in the docking station.
Ø 3.5 mm stereo cable is
connected to wrong output on
audio source when not using
docking station.
Make sure the 3.5 mm stereo cable is
connected and fully inserted in the
“line-out”, “audio out” or the
headphone jack on your sound card or
another audio source.
Speakers are mute.
Problem with audio source. Connect another player to check if the
player is not working.
Improper connection. Check whether the iPod®/iPhone® is
seated in the docking station. Check
whether the 3.5 mm stereo cable has
been connected properly. Make sure
that it is connected to the "line-out"
(line output), "audio-out" (audio
output) or the headphone jack on the
sound card or other audio source,
instead of the "speaker-out"
(loudspeaker output).
Popping sound from
the loudspeaker or
sound distorted.
There is something wrong with
the audio source.
Unplug the stereo cable on the audio
source equipment and then plug it
into the headphone jack of another
audio source (such as a Walkman,
Discman, or FM radio).
… 9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco IPD-4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco IPD-4500 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco IPD-4500

Lenco IPD-4500 User Manual - German - 10 pages

Lenco IPD-4500 User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info