477341
6
Zoom out
Zoom in
Previous page
1/10
Next page
Turn off the power
In order to minimize power consumption, set the power switch to the "OFF" position after
using the equipment to turn off the power.
Standby
When the power switch is set to the "ON" position, press the "POWER" key on the remote control to enter
the standby mode. In standby mode, the indicator light on the power switch will flash green ,
To turn on the speaker, either press the "POWER" key on the remote control again, or move the power
switch on the IPD-4500 system to the "OFF" position and move it to "ON" position again, and the IPD-4500
system will be ready to play.
Although this mode can reduce power consumption, it does not completely shut off the IPD-4500 system.
In order to minimize power drain, it is recommended that the power switch be set to the "OFF" position if
the IPD-4500 system is not to be used for a long time.
Built-in NI-MH rechargeable batteries
1. There are Nickel metal hydride rechargeable batteries built into the IPD-4500 system.
Plug the barrel plug on the adapter into the jack marked on the operating panel of the IPD-
4500 system, and then plug the external 9 V DC@ 2A power supply adapter into an AC wall outlet. After
this connection is completed, the rechargeable batteries in the IPD-4500 system can be charged whether
the system is being played or not. If there is an iPod®/iPhone® with a 30PIN connector connected to the
iPod®/iPhone® socket of the IPD-4500 system, then the iPod®/iPhon can be charged at the same time.
2. The LED light between the power switch on the panel of the IPD-4500 system and the iPod®/iPhone®
socket is the charger power level indicator light.
In the OFF mode:
a. When the AC IN cord is not plugged in: the light is off
b. When the AC IN cord is plugged in: if the power level is sufficient — the light is off
Charging – the green light flashes
In the ON mode:
a. When the AC IN cord is not plugged in: if the startup power level is sufficient for normal use
the green light is on
Warning of insufficient power level — the red light is on
The power is depleted — the light is off.
b. When the AC IN cord is plugged in, if the power level is sufficient — the green light is on
Charging — the green light flashes
Signs of abnormal battery activity:
a. When the unit is not plugged into an external power supply, no power is available to the IPD-4500 – or
the power light is off.
b. When the IPD-4500 is plugged into an external power supply – The red light flashes.
Note: "Abnormal battery condition" refers to an abnormal state caused by improper installation or use of
the battery or other problems including damage to the battery, incorrect battery polarity, lack of a
battery or end of life of the battery.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco IPD-4500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco IPD-4500 in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco IPD-4500

Lenco IPD-4500 User Manual - German - 10 pages

Lenco IPD-4500 User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info