429331

Lenco ipd-4000 Manual

5
Zoom out
Zoom in
Previous page
1/30
Next page
iPod Hifi Docking station
78
OWNER'S MANUAL
iPod Hifi Docking station
OWNER'S MANUAL
English
English
OPERATING INSTRUCTIONS
z Make sure the AC power cord from this unit is properly connected to
a 230V 50Hz household AC power outlet.
z Make sure that the minimum distance around the whole unit for
sufficient ventilation is 10cm.
Listening to Your iPod
®
Charging The Battery
IMPORTANT!
In order to prevent unwanted distortion during iPod
®
playback, it is
recommended that you set the EQ in your iPod
®
to the “Off”
position. Go to the Main Menu in your iPod
®
and then select the
Settings Menu, select the EQ Setting, and make sure that the EQ
function is set to “Off”.
( Main Menu > Settings Menu > EQ Setting > Select “Off” )
Note : We have also included one flat adaptor
with no opening at all. This serves as a dust
cover that can be inserted in the docking station
if no iPod
®
will be connected to this unit for an
extended period of time. Remove this dust cover
before use.
This unit provides an iPod
docking station on the top panel. You can
connect any “dockable” iPod
, available as of August 2006, to the docking
station and play your iPod
through the speakers of this unit. The power to
your device is being supplied by this unit, not by the iPod
internal battery.
1) Turn the main power switch to ‘On’ position at the back of the unit.
2) Plug the iPod
to the iPod
docking station. Then press PLAY/PAUSE
button on the top panel or remote control to start music playback.
3) To pause momentarily during iPod
playback, press the PLAY/PAUSE
button on the top panel or remote control or iPod
unit. Press the
1) To Fast Forward, Press and Hold the NEXT button of iPod
unit while
playing a song.
2) Press PREV button on the remote control or iPod
unit to go back to the
previous song. To Rewind, Press and Hold the PREV button of iPod
unit
while playing a song.
3) Press MENU button on the remote control, the iPod
will go to the previous
menu. Press UP/ DOWN button on the remote control to select up or
down of the iPod
menu; then press the ENTER button to enter selected
menu.
4) When iPod
Video is plugged into this unit, the video can be viewed from
other display by connecting the VIDEO OUT jack to the desired video
display ( video connection cable is not included).
Remarks: Please make sure the TV Out is set to ON in the iPod
Video
Setting menu. Otherwise the video signal will not be able to
show on the display. (For detail, please check the iPod
Video
Instruction Manual.)
5) When the iPod
is docked in the unit, the iPod
internal battery can be
charged during iPod
playback, Pause mode or AUX mode, if the main
power is switched “Off”, the charging will be cut off
Note : You must keep the main power switch “On” during iPod
®
internal battery charging.
AUXILIARY IN
Connect the Audio Output jacks of your auxiliary sound source (TV, VCR, DVD
Player, Cassette Deck, Mini Disc player, etc., etc.,) to the AUX IN jack on the
back panel of the unit. The auxiliary function will only activate when the
aux in jack is fitted with connection cable
Note: The connection cables are not included.
1. Press and hold the PLAY/PAUSE button on the main unit or IPOD/AUX
button on the remote control to inter-change the play mode from iPod
to
Aux. Press PLAY/PAUSE button once on the main unit or remote control
to inter-change the play mode from Aux to iPod
. During AUX playback,
the iPod
display will not light up.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco ipd-4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco ipd-4000 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info