601611
4
Zoom out
Zoom in
Previous page
1/6
Next page
Notes on CDs
·Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out.
·Do not expose the CD to direct sunlight or heat sources such as hot air ducts, not leave
it in a car parked in direct sunlight as there can be a considerable rise in temperature
inside the car.
·Do not stick paper or stickers on the CD, nor scratch the CD.
·After playing, store the CD in its case. If there is a scratch, dirt or fingerprints on the CD,
it may cause a tracking error or skipping.
Scratched Discs
If your disc is badly scratched, it will not play. You may be able to repair the disc if you
buy a disc polisher.
2.MAINTENANCE
Cleaning the Lens
If the lens becomes dirty, it may cause a skipping of sound during CD operation.
Clean with a commercially available lens cleaner and blower.
Cleaning the Cabinet
Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent,
such as alcohol or benzene
3.SPECIFICATION
Power source
AC 230V
DC 9V (6 size ”C” batteries)
Speakers
4 ohm
Output power
2X2W RMS
Dimensions
360 X 270 X 160
Playable disc typerange
CD/MP3 DISC
Radio Frequency
FM:87.5-108 MHZ
DAB:174-240MHZ
Page 2
Page 7
8. LISTEN TO THE RADIO
In FM mode:
(1)Press SOURCE button to select FM mode.
(2)Press Up button /Down button to manually search for frequency
(0.05MHz) step by step.
(3)Press and hold the button or to search for the station automatically.
press again to stop searching.
(4)Press ST/MONO button to select ST or MONO that you want.
(5)Press the Volume + /Volume - to adjust your desired Volume level.
(6)Press and hold the power button to turn the unit to STANDBY mode.
In DAB mode:
(1)Press SOURCE button to select DAB mode.
(2)Press Up button /Down button to manually search for stations step by step.
(3)press and hold the Stop button to full scan from the lowest frequency to the
highest frequence for the strongest signal stations and all of the strongest
stations are stored.
(4)Press the FF/up , REW/down select the stored station after the full scan
operation..
(5)Press and hold the power button to turn the unit to STANDBY mode.
(6)In DAB mode, press INFO button to display the information of the current DAB
program.
8.1 Preset and store the station your want to listen to
In FM/DAB mode:
(1)To store the station your current listening, Press and hold the
Preset/Id3 button to activate the Preset function. The preset number
*” will flash in the LCD. ( “*” represents Preset Number 1~20)
(2))Press the Album + /Album - to select the Preset Number you want to store
(3)Press the Preset/Id3 button to confirm your setting.
(4)Repeat step 1-3 to preset other stations.
(5)Press the Preset/Id3 button to recall the preset station. Use the
the Album + /Album - to select.
(6)Press the Preset/Id3 button or select button to listen to the
select stored stations.
(7)Press and hold the reset button for about 5 seconds to System reset mode.
All of the stored DAB and FM stations will be deleted.
1
18
12
12
18
18
18
1
8
16
5
5
14
4
4
7
3
3
14
14
16
16
14
16
12
13
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco DR-439 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco DR-439 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Lenco DR-439

Lenco DR-439 User Manual - German - 10 pages

Lenco DR-439 User Manual - Dutch - 11 pages

Lenco DR-439 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info