534500

Lenco DR-05 BT Manual

11
Zoom out
Zoom in
Previous page
1/91
Next page
INFO mode
Each time you press the INFO button on remote control or MENU/INFO button on the
front panel, the screen will cycle through the following information:
1. RSSI reception
2. Music style— such as <Rock music>
3. Station name — such as <BBC National DAB>
4. Frequency — such as <5A 174.928MHz>
5. Signal error: 25
6. Bit rate — such as <128Kbps/DAB>
7. DLS information
Enter setting menu
Press and hold the MENU/INFO button on the front panel or MENU button on remote
control to enter setting menu, rotate TUNER KNOB to scroll down the menu contents:
<Full scan>→<Manual tune>→<DRC>→<Prune> →<System>
DRC (Dynamic range control)
this is to adapt the dynamic range of the audio signal to listened in a noisy environment.
Note: This function is not always available in many DAB stations.
Steps as below:
1. Press and hold MENU/INFO button on the front panel or MENU button on remote
control, rotate TUNER KNOB to find <DRC> setting.
2. Press ENTER button to enter menu contents and choose DRC Off, DRC High or DRC
Low.
3. Press ENTER to confirm the setting.
This causes the radio to reduce the dynamic range of the audio signal. The purpose of
Prune stations
When the radio has performed a scan in several locations you may find there are some
stored stations that you can no longer receive. This function automatically removes then
from the stored station list.
Steps as below:
1. Press and hold MENU/INFO button, rotate TUNER KNOB to find <Prune> setting.
2. Press ENTER button to enter menu contents and choose YES or NO.
3. Press ENTER to confirm the setting.
System settings
Press and hold button, to find <System> , press
ENTER button to enter setting menu. Rotate TUNER KNOB to scroll down the menu
contents: <Language> ,<Factory reset> and <SW version>.
MENU/INFO rotate TUNER KNOB
Language
To select the languages of the unit in this section:
1. Press and hold MENU/INFO button, rotate TUNER KNOB to find <System> setting.
2. Press ENTER button to enter menu contents and find <Language> setting.
3. Press ENTER to choose from <English>, <French>, <Deutsch>, <Nederlands>
and <Espanol> .
4. Select one of the languages above, and press ENTER button to confirm.
10
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco DR-05 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco DR-05 BT in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 5,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info