792980
9
Zoom out
Zoom in
Previous page
1/96
Next page
- EN 9 -
BATTERY INSTALLATION
Battery must be inserted correctly to avoid damaging to the remote control. Always remove the
battery when the remote control will not be used for a long period of time, as this may cause
leakage of the battery and subsequently damage the remote.
Inserting the remote control batteries
1. Push the release clip on the battery compartment downwards and lift to remove the cover.
2. Insert 2 x 1.5 V AAA batteries (not supplied) the correct way around, by observing the polarity (+ and -)
indicated on the battery compartment.
3. Place the furthest end of the cover in position on top of the battery compartment. Then press the
nearest end of the cover until you hear it click firmly into place.
If the distance required between the remote control and the appliance decreases, the batteries are exhausted. In
this case replace the batteries with new ones.
Power
CAUTION
Risk of product damager! Make sure that the power voltage
corresponds to the voltage printed on the back label.
Risk of electric shock! When you unplug the AC power cord always pull
the plug from the socket. Never pull the cord
Before connecting the AC power cord, ensure you have completed all
other connections
Place the unit in the desired position and unravel the mains cable. Insert the cable into the supply socket
and switch on if applicable.
Auto standby
When playing media from a connected device, the device automatically switches to standby if:
No button is pressed for 10 minutes,
No audio from a connected device for 10 minutes.
Unit power supply (mains 230V/50Hz)
Connect the power cable plug to the (230V) wall outlet.
Warning:
Before using the unit, check that your local mains power is compatible with the unit: 230V (50Hz).
Do not plug or unplug the power cable when your hands are wet.
When planning not to use this unit for long periods of time (i.e., Vacation etc.), disconnect the plug
from the wall outlet.
When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord in order to
avoid shock risks caused by damaging the cable.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco DAR-051 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco DAR-051 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info