694785

Lenco DAR-012 Manual

10
Zoom out
Zoom in
Previous page
1/56
Next page
Aux in function
Switch the unit on by pressing the “POWER” button.
- Press the “FUNCTION” button until “AUX mode” is shown on the display.
- Now you can play music from other music devices (MP3, CD player, Smartphone etc.)
connected to the RCA aux in connections on the back of the unit.
Bluetooth function
- Press the “FUNCTION” button until “BT mode” is shown on the display.
- If the Lenco DAR-012 has never been paired or cannot find the last paired device, the
display will show “UNCONNECT”. This means the unit is in search mode. Please follow
the instructions below to pair your Bluetooth device with the Lenco DAR-012.
- When pairing was successful, the display will show “CONNECTED”.
- By pressing the “PAIR/SCAN” button you can PLAY/PAUSE the song.
- Turn the “TUNING” knob to play previous or next song.
- Press and hold the “PAIR/SCAN” button for 3 seconds to pair with another Bluetooth
device
Notes: If your Bluetooth enabled device does not support A2DP profile, it will not play the
music through the speaker, even if paired (linked).
Clock and Alarm Operation
- If the radio is powered off, you can turn on the display light for a few seconds by pressing
any button.
Setting the alarm
- Make sure the radio is turned off. Press and hold the “MENU” button until the hour
indicator starts to blink. You can set the hour by turning the “TUNING” knob and when
you have reached the desired hour time, press the “TUNING” knob to confirm. Now you
can set the minutes by turning the “TUNING” knob again and pressing the “TUNING”
knob to confirm.
After confirming the minutes you may set the alarm sound (BUZZER, DAB or FM) by turning
the “TUNING” knob and confirm by pressing the “TUNING” knob
Setting the time
- Make sure the radio is turned off. Press and hold the “SELECT” button until “Time setup”
is shown on the display. Turn the “TUNING” knob until you see “Set Clock” and select it
by pressing the “TUNING” knob.
You can set the hour by turning the “TUNING” knob and when you have reached the
desired hour time, press the “TUNING” knob to confirm. Now you can set the minutes by
turning the “TUNING” knob again and pressing the “TUNING” knob to confirm.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco DAR-012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco DAR-012 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info