694785
7
Zoom out
Zoom in
Previous page
1/56
Next page
When power on default mode is DAB, press “function” button to change the function:
DAB‐‐‐FM‐‐BT‐‐‐AUDIO‐‐‐DAB
Press “DIMMER” button in standby or other modes to change the backlight brightness:
dark—half bright—bright.
Listening to the FM
- Press and hold “SCAN” to search the radio automatically, every search start from
87.5MHZ, Found radio stations will be stored automatically. The first stored radio station
will be played automatically when the scan is completed
- Press INFO to show current radio station information {No Radio Text} (text
information) {No PTY} (program type) {No Name} (radio station name)‐‐‐‐Mono/
Stereo‐‐‐‐Time‐‐Date
- Press “P.SET” to show the first stored radio
station
Preset Recall
< 1: 87.50MHz >
-
Turn “TUNING” to select the radio stored previously, Press “
TUNING” to confirm
automatically confirm in 3 sec.
- Short press “INFO” to see current time.
- Turn the “TUNING” knob to select radio station, press and hold “P.SET” to save.
When the display
shows
Preset Store
Turn TUNING” knob to Save this radio station
as preset 1 or 2 etc. then
< 1: 87.50MHz >
Preset 1
Press theTUNING” knob to confirm. When the
radio station has been saved, the display will show
stored
Repeat the above steps to save other radio stations.
Press “MENU” to show < System >, Press “TUNING” and turn “TUNING” knob to enter:
- <Language> (system language setting) system language: Press TUNING” knob to select
languages, default setting is English. There are 4 languages: Deutsch, Italiano, Francais,
Portuguese. There will be an ‘*’ to mark the selected one.
- <Factory Reset> System reset: PressTUNING” to reset. After reset, the standard mode
will be DAB Radio
- <SW Version> Will show the actual firmware version
NOTE: For optimum FM radio reception, extend Telescopic FM antenna. To improve
Reception quality, rotate the unit.
Listening to the DAB
Press the “FUNCTION” button until the display shows “DAB Mode”
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco DAR-012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco DAR-012 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info