669538

Lenco CR630 Manual

7
Zoom out
Zoom in
Previous page
1/51
Next page
7
Selecting the modes
When the radio is turned on, press the Mode button repeatedly to switch between DAB + and FM
modes.
DAB+ operation
When you first select DAB+ radio, press and hold Scan button it will search for and store all available
DAB+ stations.Once Auto search is completed, your radio will select the first station tuned.
Selecting between stations. With your radio on:
Press the Mode button to select DAB+ mode.
Press the Prev or Next button to navigate through the list of stations.
Press Enter button to tune to the station currently shown on the display.
You may adjust volume by pressing Vol+ or Vol- button.
FM operation
With your radio on, press the Mode button to select FM mode.
Press the Prev or Next button to manually tune to specific frequencies by 0.05MHz per step.
The radio also includes the scan feature of FM, allowing you to automatically tune to FM stations.
Press and hold the Next button to automatically search for the next available radio station. When a
station is found it will be automatically played.
You can search for stations in the opposite direction by pressing and holding the Prev button.
Storing stations as presets
Radio can store 10 stations as presets in both DAB+ and FM mode. To store a preset:
Tune to the station you like, press and hold the Preset button.Display indicate Preset <xx: (Empty)>,
now with Prev or Next button to select desired preset for store.
Press the Enter button to store the station.The message “Preset xx stored” will appear on the display.
Recall stations saved as presets
To recall a preset station:
Select the band (DAB+ or FM) of the station by pressing the Mode button.
Press the Preset button to recall the preset station, then using the Prev or Next button to browse
through your presets and press the Enter button to confirm.
Setting the time automatically
When you first turn on the radio it will automatically synchronise to the local time while searching
for DAB+ stations. If the time hasn’t set itself try to change the location of the device for a better
signal.
System Settings
With the unit on, press and hold the Info/Menu button.This will open the “Set Menu”.
Press the Prev or Next button to select your desired Sub-option.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco CR630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco CR630 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info