694815

Lenco CR-550 Manual

8
Zoom out
Zoom in
Previous page
1/53
Next page
8
SET TIME/YEAR/MONTH/DAY
1. Power on the unit, the display will blinking, now into the TIME SET mode, press
[HOUR/SKIP-] button to set the hour, press [MIN/SKIP+] button to set the minutes, press
[CLOCK/MEM.] button confirm the time set then into the YEAR SET mode (year range:
2017-2099), press [HOUR/SKIP-] button decrease the year, press MIN/SKIP+] button
increase the year, press [CLOCK/MEM.] button confirm the year set then into the
MONTH/DAY SET mode, press [HOUR/SKIP-] button increase the month and press
[MIN/SKIP+] button increase the day, press [CLOCK/MEM.] button confirm the month/day
set then exit the time set mode. The unit will auto-exit the set mode if you not press any
buttons for 5 seconds
2. Under standby mode, press and hold [CLOCK/MEM.] button for 2-3 seconds, the LED will
start blinking, the unit enters time set mode. Setting method same as above
ALARM SET
1. Under standby mode, press and hold [AL.1/VOL-] button, the “AL.1-BUZZ” indicator and
time will blinking, the default alarm time is 08:00AM, press [HOUR/SKIP-] button adjust the
hour, press [MIN/SKIP+] button adjust the minute, press [AL.1/VOL-] button confirm the set
then into the repeat date set, press [HOUR/SKIP-] button and [MIN/SKIP+] button can select
“WEEK 1-7”, “WEEK 1-5”, “WEEK 6-7”, press [AL.1/VOL-] button confirm the date set then
into volume set, press [HOUR/SKIP-] button and [MIN/SKIP+] button can select “0-16”
volume levels (the default volume is 10 level), press [AL.1/VOL-] button confirm the volume
set then exit the set mode, the alarm will be activated when time out.
Remark: Can only have the volume set when alarm the radio, no volume set when alarm
BUZZ, the volume can’t gradually increase when alarm BUZZ, but volume can gradually
increase from 0 level to the set volume level when alarm radio
2. Under standby mode, press [AL.1/VOL-] button can select BUZZER→RADIO→ALM OFF. If
you not press the [AL.1/VOL-] button for 5 seconds, the unit will auto confirm the alarm and
exit the set mode
3. When the alarm is activated, if not press any buttons, the alarm will auto-stop after
continued for 1 hour, press [AL. OFF/POWER] button can turn off the alarm. The related
indicator will blinking when the alarm is activated
4. Alarm 2 set same as Alarm 1
SNOOZE FUNCTION
When alarm is activated, press [SNOOZE/SLEEP] button into snooze mode, the alarm will be
activated again after 9 minutes, continued for 60 minutes, press [AL. OFF/POWER] button to
turn off the alarm
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco CR-550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco CR-550 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info