601585

Lenco CR-16 Manual

7
Zoom out
Zoom in
Previous page
1/69
Next page
6-7 : Saturday & Sunday
1-1 : One day of week (you need to further select 1 for
Monday, 2 for Tuesday and so on)
5. Tap the ALARM 1 (or ALARM 2) button again to advance to
select the Alarm source between Beeper or Radio.
Notes:
- When the Beeper alarm begins, it will sound at a lower
beeping rate and gradually increase to the normal rate within
30 seconds.
- If you want to choose radio as the alarm source, you need to
set the radio to your desired radio station in radio mode rst.
- After selecting the Radio as the alarm source during alarm
setting, you need to select FM radio and the preset alarm
volume level (up to maximum level 15). When the radio is
turned ‘On’ at the preset alarm time, the radio will begin to
sound at a low volume and gradually increases to the preset
volume level.
Note: it is not possible to adjust the volume level during the radio
alarm. If volume adjustment is needed, you must turn ‘Off’ the
radio rst, and then turn it ‘On’ again using the POWER ON-OFF
button. The alarm will also be stopped immediately.
6. Press the ALARM 1 (or ALARM 2) button to nish setting and
exit to normal time display.
7. To disable ALARM 1 (or ALARM 2) from automatically
sounding on the upcoming days, press and hold the ALARM
1 (or ALARM 2) button for about 2 seconds, the corresponding
ALARM 1 (or ALARM 2) INDICATOR will go off.
8. To resume ALARM 1 (or ALARM 2) from automatically
sounding on the upcoming days, press and hold the ALARM
1 (or ALARM 2) button for about 2 seconds, the corresponding
ALARM 1 (or ALARM 2) INDICATOR will turn on and the alarm
will sound the following day at the set time.
TURNING OFF THE ALARM
When the preset alarm time is reached, the ALARM 1 (or ALARM
2) INDICATOR will ash on the LCD DISPLAY and the beeper
alarm or radio will sound for 30 minutes unless interrupted
by pressing SNOOZE. To stop the alarm immediately, tap the
corresponding ALARM 1 (or ALARM 2) button or POWER ON-
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco CR-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco CR-16 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info