Manual Lenco BTP-200 (page 8 of 52) (English, German, Dutch, French, Spanish)

694889

Zoom out

Zoom in

1/52

1. The Bluetooth Speaker will send tones sound from speaker by every

some minute. When you heard this reminder, please connect the

device to the USB power for charging, if you still want to use the device.

2. If not, the Bluetooth Speaker will power Off automatically when the

battery is keeping low energy level in some minutes.

3. In this case, the device cannot be turned On, until you recharging the

battery at least 10 ~ 15 minutes, because the rechargeable battery has

not enough energy.

4. Press and hold “ (2)” button to turn On the device after charged with

enough energy if you want.

M. Connecting two speakers and a BLUETOOTH device for the Stereo

pairing function

Activate the stereo pairing function:

1. Bring two speakers within 1 m of each other, and then turn on each

unit.

2. Press and hold the “ and ” buttons at the same time until tones

are heard on one unit, the “Bluetooth LED (7)” will fast blinking and

waiting for stereo pair connection. (This unit will default as host and

left channel device)

3. And press and hold the “ and ” buttons at the same until tones

are heard on the other unit, the “Bluetooth LED (7)” will fast blinking

and searching for stereo pair host unit. (This unit will default as slave

and right channel device)

4. Two devices are under stereo pairing, a series of tones should sound

from both devices in seconds;

5. And, the right device’s “Bluetooth LED (7)” should switch to slow

blinking and this device could not found by the mobile device since it

already paired with slave device of Bluetooth speaker.

6. And, the Left device’s “Bluetooth LED (7)” should switch to fast

blinking for waiting Bluetooth pairing with mobile device.

7. Then activate the Bluetooth function in your mobile device, open and

enter to Bluetooth searching mode, the mobile device should show

one of “Lenco BTP200” instead of two in list, choose it for start the

stereo pairing function.

8. This stereo pairing procedure is not required once stereo pairing

function is activated with both speakers; two speakers will stereo

pairing automatically when each time you turn on them together.

Besides, you can disable the stereo pairing function by using the

following methods.

Disable the stereo paring function on two speakers:

1. In speakers power on mode, short press the “ and ” buttons at

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Lenco BTP-200 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Lenco BTP-200 Manual

Product: