paused music will resume automatically.
Tip: speak to the “MIC (9)” direct with distance in 30 ~ 60cm to get the best
speakerphone performance when necessary.
10. Redial For Last Call Function
a. To redial for last called number by the Bluetooth function, even it is in
music playing mode.
b. Press twice the “/ (14)” button to enter into redial function, the
playing will pause and switch to hand free function for redial.
c. Press the “/ (14)” Button again to hang up the redial call.
d. Make sure that your mobile phone has have last dial call used, if not,
the redial for last call function cannot be activated.
Please turn on the Bluetooth function when you want to use the AUX In
function. And make sure that the external device has switched on and
controlled to AUX output source with music playing.
1. In power at on and Bluetooth function mode;
2. Connect the Bluetooth Speaker’s “AUX IN Jack (16)” with an external
device’s “Earphone/AUX/LINE” Output through the Audio Cable
(Provided).
3. The Bluetooth Speaker will switch to AUX In mode automatically from
Bluetooth mode, a series of tones will sound and the “Bluetooth LED
(6)” will switch to light red from blinking blue.
4. At the same time, the RGB lights will switch to rainbow effect once
AUX In is in connected mode.
5. Now the AUX In function is ready, start to music play from your
external device by it control and or program, for example, Play, Stop,
volume control…etc.
6. Besides, you also can use Bluetooth Speaker control;
7. Press and hold the “ (11)” button to increases the volume level.
8. Press and hold the “ (12)” button to decreases the volume level.
9. When maximum or minimum volume is reached, a beep will sound.
10. Disconnect the Audio cable when it is done and it will switch back to
Bluetooth mode automatically.
1. The Bluetooth Speaker will send tones sound from speaker in minutes.
When you heard this reminder sound, please connect the device with
USB power for charge if you still want to use the device.
