654276
14
Zoom out
Zoom in
Previous page
1/197
Next page
Lelit Espresso - English
EN
13
C
Switch on the coffee machine
Caution. Ensure the power supply voltage is the same as that indicated on the
information plate and that the supply system has an adequate circuit breaker.
C.1 Connect one end of the power cord (c) to the socket in the machine and the
other (plug) into the wall socket.
C.2 Turn on the espresso machine by pressing the main on/off switch (2). The dis-
play (12) will show the Lelit logo, the three switches and the gauge will go on for a
short time.
Note. ONLY for the rst time that the machine is switched on, the machine will
start to ll the boiler automatically. During this operation, water will ow from the coee
distribution group for about 40 seconds and the Lelit logo will ash on the LCC display.
C.3 On the LCC display (12) you’ll see the water boiler temperature ashing. This will
grow until the set temperature will be reached.
C.4 Wait until the bar is fully loaded and “Ok” appears on the display. This way the ma-
chine will reach the set temperature.
C.5 After reaching the pre-set temperature, the bar will disappear. The machine will be
ready for use.
D
Checking that the machine is working properly
Coffee
D.1 Insert the lter holder (e) without coffee rmly into the coffee distribution
group (6), so as to align the handle with the padlock symbol on it.
Note. With a new machine, in order to reach this position, it is advisable to moisten
the edge of the lter with water. Aer a short period of use, this position will be reached
regularly without excessive eort.
D.2 Press the coffee switch (3) to dispense about half a litre of water. The display
(12) will show the coffee icon and a countdown from the pre-set time for the
coffee dispensing.
D.3 When you’ve taken about half a litre of water, press the switch (3) to stop dispensing.
Note. This procedure helps lling the hydraulic circuit completely and
rinsing the circuit itself.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lelit Victoria PL91T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lelit Victoria PL91T in the language / languages: English as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info