792735
50
Zoom out
Zoom in
Previous page
1/160
Next page
50
Notes on handling food products
With tipped or sharp-edged food products
(e.g. bones, sh bones), cover the edges with
paper or residual lm of a vacuum bag.
Freeze liquid food products in a baking tin
or hardened bowl before vacuuming. Then
seal air tight and put back into the freezer
immediately.
To seal food products that are not frozen
vacuum tight, you need an additional approx.
5 cm longer bag length to allow the food
products to expand during freezing.
Cool or freeze perishable food products
immediately after you have vacuum
sealed them. Do not keep them at room
temperature.
Correct sealing has a "clear" appearance.
If the sealing seam is spotted, incomplete,
has folds or a milky appearance, cut off the
sealing seam and repeat the procedure.
Sensitive products such as meat, sh,
berries, etc. should be frozen rst so that
they are not squashed when vacuuming, or
use the PULSE button of the vacuuming
appliance to control the vacuuming proced-
ure manually.
If you are packing unfrozen fresh meat, lay
a piece of kitchen roll, paper cloth between
the meat and the top side of the bag.
This helps to absorb the moisture.
Products with high dust content should not
be vacuumed in bags.
Never pack mushrooms or garlic under
vacuum.
Wash your hands and all utensils and
surfaces before vacuum packaging food
products.
If fruits and vegetables are peeled before va-
cuum sealing, this extends their product life.
Blanch and freeze vegetable types such as
broccoli, cauliower and cabbage before you
vacuum them otherwise they will emit gases.
IVacuum packaging
in a container
Use only the vacuum containers recommended
by the manufacturer and make sure that these
are clean and dry.
Clean the edge and the seal of the container lid.
Take a close look to see if the lid, valve or
container are damaged.
1. Place the food product in the container.
Ensure for sufcient space (min. 1 cm) to the
container lid.
2. Open the appliance cover.
Attach the hose adapter to the connection on
the appliance intended for this purpose and
place the suction cup onto the opening of the
container lid.
3. Keep the suction cup pressed on slightly so
that this rests tight on the container lid.
Before using the vacuum container, also
always observe the operating instructions
and notes of the manufacturer.
Press the AUTO button to start the vacuuming.
The appliance stops automatically and the in-
dicator lamp goes out as soon as the procedure
is completed.
Now you can remove the suction cup and take
the hose adapter off the appliance.
Always observe the operating instructions of
the vacuum container.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leifheit Vacu Power 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leifheit Vacu Power 100 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info