495459
195
Zoom out
Zoom in
Previous page
1/206
Next page
- 195 -
Others
When recording under fluorescent or LED lighting etc., increasing the shutter speed may introduce
slight changes to brightness and color. These are a result of the characteristics of the light source
and do not indicate a malfunction.
When recording subjects in extremely bright locations or recording under fluorescent or LED lighting,
mercury lamps, sodium lighting etc., the colors and the monitor brightness may change or horizontal
striping may appear on the monitor.
This is characteristic of MOS sensors like the one in this camera. It appears
when the subject has a bright part. Some unevenness may occur in the
surrounding areas, but this is not a malfunction.
It is recorded in still and motion pictures.
It is recommended that you take pictures while taking care not to expose
the screen to sunlight or any other source of strong light.
Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures.
Depending on the type of the card, recording may stop by itself.
> If motion picture recording stops during use of a card of at least Class 4” or if you use a card
that has been formatted on a computer or other equipment, the data-writing speed is lower. In
such cases, we recommend that you make a backup of the data and then format (P65) the card
in this camera.
The subject is rendered slightly distorted when it moves across the image very fast, but this is
because the camera uses a MOS image sensor. This is not a malfunction.
Has [Side Lever] (P54) been set to [FOCUS]?
> Set [Side Lever] to [ZOOM].
Point the AF frame at a distinctive color within the subject if there has a part that is different color
than the surrounding area. (P90)
If the camera is moved too slowly, it assumes that the camera motion was stopped and will end the
still picture recording.
If there is a great deal of shaking towards the recording direction while moving the camera, recording
will end.
> When recording with [Panorama Shot], move the camera by trying to trace a small circle parallel
to the recording direction at a speed of about 8 seconds per revolution (estimated).
The brightness or the hue of the recorded picture is different from the actual scene.
Reddish horizontal streaks appear on the monitor during recording.
Motion picture recording stops by itself.
Subject is rendered slightly distorted.
The zoom cannot be controlled with the zoom/focus rocker.
Subject cannot be locked.
(AF tracking not possible)
Recording by [Panorama Shot] is ended before finishing.
195


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica V-Lux4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica V-Lux4 in the language / languages: English as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica V-Lux4

Leica V-Lux4 User Manual - German - 206 pages

Leica V-Lux4 User Manual - Dutch - 206 pages

Leica V-Lux4 User Manual - French - 206 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info