102564
101
Zoom out
Zoom in
Previous page
1/145
Next page
Menu Settings
101
You can set the aperture value, the shutter
speed and the ISO sensitivity on the
camera even when attaching the external
flash.
Some commercial external flashes have
synchro terminals with high-voltage or
reversed polarity. Using such extra flashes
may cause a malfunction or the camera
may not operate normally.
If you use commercially available
external flashes with communication
functions other than the dedicated one,
they may not operate normally or they
may be damaged. Do not use them.
Even if the external flash is turned off,
the camera may enter the external
flash mode when the external flash is
attached. When you are not using the
external flash, detach it or set it to
Forced OFF.
When attaching the external flash, the
built-in flash cannot be activated.
Do not open the built-in flash when an
external flash is attached.
When attaching the external flash, the
camera will become unstable.
Detach the external flash when carrying
the camera.
When attaching the external flash, do not
hold only the external flash because it
may detach from the camera.
If you use the external flash when the
white balance is set to [ ] finely adjust
the white balance depending on the
picture quality. (P85)
If you take pictures close to the subject in
Wide, the vignetting effect may appear on
the bottom of the recorded picture.
Read the operating instructions of the
external flash for details.
Press [ ] to display the [REC] mode
menu and select the item to set. (P82)
This mode allows you to take multiple
pictures at one time when the external flash
is attached.
Set [EX.FLASH BURST] to [ON].
Press the Single/Continuous Mode Button
to switch the continuous mode setting.
You can take up to 3 pictures by keeping
the shutter button pressed down.
w Number of pictures recorded in
continuous mode
Depending on the external flash you use
or the recording conditions, you cannot
take pictures in this mode or the amount
of light may become insufficient for the
second or subsequent pictures.
Press [ ] to display the [REC] mode
menu and select the item to set. (P82)
Change date and time. (P26)
[EX.FLASH BURST]
Taking pictures in continuous
mode while firing the flash
Frequency
(pictures/
second)
Number of recordable
pictures (pictures)
2
max. 3
1
Approx. 1
[CLOCK SET]
Set the date, time and display
SET
MENU
SET
MENU
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica V-LUX 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica V-LUX 1 in the language / languages: English as an attachment in your email.

The manual is 5,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica V-LUX 1

Leica V-LUX 1 User Manual - German - 152 pages

Leica V-LUX 1 User Manual - Dutch - 149 pages

Leica V-LUX 1 User Manual - French - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info