585256
53
Zoom out
Zoom in
Previous page
1/78
Next page
3. The numbers and letters are changed by turning the click wheel (1.18)
or pressing the joystick (1.17) up or down, and other characters are
selected by pressing the click wheel or pressing the joystick inwards,
left or right.
The available characters are upper case letters from A to Z, numbers
from 0 to 9 and a space _ ; you can scroll through them in this order in
an endless loop.
4. Confirm your settings by pressing button (1.18), in this case labeled OK
or by pressing the click wheel or moving the joystick inwards after set-
ting the last character.
A further submenu appears containing the query Reset image num-
bering?.
5. Select Yes or No.
Once you have confirmed your selection by pressing the click
wheel or the joystick forwards, the setting menu described under 2.
appears again.
Note:
You can also reset the picture numbers without creating a new folder
first. To do this, select Reset in the picture numbering submenu and pro-
ceed as described in 4. and 5. above.
Changing file names
1. In the SETUP menu (see p. 17/26), select Image Numbering (5.19), and
2. then Change filename in the associated submenu.
The file name appears. The first character (initially always LXXXXXX1)
is marked as ready for editing.
Characters 1-4 can be changed.
3. The numbers and letters are changed by turning the click wheel (1.18)
or pressing the joystick (1.17) up or down, and other characters are
selected by pressing the click wheel or pressing the joystick inwards,
left or right.
The available characters are upper case letters from A to Z, numbers
from 0 to 9 and a space _; you can scroll through them in this order in
an endless loop.
4. Confirm your settings by pressing the click wheel or by pressing the
joystick inwards.
The initial menu list appears.
FORMATTING THE MEMORY CARD(S)
It is not normally necessary to format (initialize) a memory card that has
already been used. However, when an unformatted card or a card format-
ted in another device (e.g. a computer) is used for the first time, it must
be formatted.
Important:
When formatting, all existing data on the card is not necessarily irretriev-
ably lost.
It may be possible to access some of the data again using appropriate
software. Only the data that is then overwritten by saving new data is
actually permanently deleted.
Notes:
Do not turn the camera off while memory cards are being formatted.
If the memory card has been formatted in another device, such as a
computer, you should reformat it in the Leica S.
If the memory card cannot be formatted, you should ask your dealer or
Leica Information Service (address, see p. 74) for advice.
Even protected pictures (see previous section) are deleted when for-
matting the memory card.
Setting the function
1. In the SETUP menu (see p. 17/26), select Format (5.20), and
2. then which of the two cards you want to format, or both, in the sub-
menu.
To prevent unintentional settings, a corresponding query appears in
the monitor.
3. Press the click wheel (1.18) or the joystick forwards (1.17) to confirm
that you really want to format the memory card(s).
50
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica S in the language / languages: English as an attachment in your email.

The manual is 11,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica S

Leica S Quick start guide - English - 28 pages

Leica S User Manual - German - 72 pages

Leica S User Manual - Dutch - 78 pages

Leica S User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info