594983
40
Zoom out
Zoom in
Previous page
1/72
Next page
EN
36
Recording mode
ADDITIONAL FUNCTIONS
USER / APPLICATION-SPECIFIC PROFILES
On the Leica S, any combination of menu settings can be permanently
stored, e.g. so that they can be retrieved quickly and easily at any time
for recurring situations / subjects. A total of four memory slots are
available for these combinations, as well as a factory default setting that
can be retrieved at any time and cannot be changed. You can change the
names of the saved profiles. Profiles set on the camera can be trans-
ferred to one of the memory cards, for example for use in other camera
units, while profiles stored on a card can be transferred onto the camera.
Saving settings / Creating a profile
1. Set the desired functions in the menu
2. In the menu, under
SETUP , select the item User Profiles and
3. select
Save as User Profile in the sub-menu
A further sub-menu appears with four lines for the available profile
slots.
4. In this sub-menu, select the desired memory slot
A corresponding confirmation prompt appears
5. Confirm
Ye s or cancel No your selection there
The sub-menu from step 4. appears again, and the selected mem-
ory slot is marked as occupied.
Selecting a profile
1. In the menu, under
SETUP , select the item User Profiles and
2. select
Load Profile in the sub-menu
A further sub-menu appears with five lines, the first for the factory
settings, the others for the four profile slots.
Only the lines with occupied profiles can be called up.
3. In this sub-menu, select the desired profile
The selected profile is marked as
active.
Note:
If you change one of the settings for the profile currently in use ---
appears instead of the name of the profile you were previously using in
the initial menu list.
Renaming profiles
1. In the menu, under
SETUP , select the item User Profiles, and
2. select
Rename User Profile in the sub-menu
A further sub-menu appears with four lines for the profile slots.
Only the lines with occupied profiles can be called up.
3. Select the desired profile
A keyboard sub-menu is displayed.
4. First delete the existing designation in the title line there, then select
the desired characters
Turning the rear thumbwheel or pressing the Joystick to left or
right allows each character to be selected in an endless loop.
Pressing the Joystick up or down allows you to move between
lines.
Pressing the rear thumbwheel or the Joystick forward copies the
selected character to the title line.
Special "buttons":
1 2
43
1 Switch between capital and small letters
2 Delete characters
3 Switch between letter and number, or punctuation marks and
special characters
4 Spacebar
5. Confirm your inputs with the function keys marked
O or OK to the top
right or bottom right of the monitor
The sub-menu from step 2. appears again, the edited profile has
the new designation.
Saving profiles to a card / transferring profiles from a card
1. In the menu, under
SETUP , select the item User Profile and
2. select
Import from card or Export to Card in the sub-menu.
A corresponding confirmation prompt appears
3. Confirm there that you really wish to import or export the profile.
Note:
When exporting, all profile slots are transferred to the card, i.e. including
any empty profiles.
As a result, when importing profiles any existing profiles in the camera
will be overwritten, i.e. deleted.
RESETTING ALL CUSTOM SETTINGS
This function allows you to delete all previous custom settings in the
menu at once, and to reset them to the factory default settings.
Setting the function
1. In the menu, under SETUP , select the item Reset Camera and
2. select
No or Ye s in the sub-menu.
Note:
This reset also applies to the profiles that may have been created and
saved with
Save as User Profile (see left column).
Inhalt_EN.indd 36 20.08.2015 14:14:44
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica S 007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica S 007 in the language / languages: English as an attachment in your email.

The manual is 11,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica S 007

Leica S 007 User Manual - German - 72 pages

Leica S 007 User Manual - Dutch - 72 pages

Leica S 007 User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info