636414
62
Zoom out
Zoom in
Previous page
1/72
Next page
Rugby 870/880, Troubleshooting
62
The beam is not emit-
ting from all sides of
the laser.
Beam masking is activated for two or more
sides of the laser. To de-activate or change
beam masking, refer to " Beam Masking".
It is not possible to
enter grade greater
than 10.00% or
3.000%.
The Rugby allows for up to 10% grade entry
in both axes simultaneously. If the grade
entry for one axis is greater than 10%, the
cross axis is limited to 3%.
The Rugby is not
communicating with
the RC800 remote
control.
The Rugby has lost the communication link
to the remote control.
Ensure that you are within clear sight
of the Rugby and that you have not
exceeded the 100 m (300’) working
range.
Smart Targeting does
not work.
The LEDs on the Rod
Eye 180 are flashing
ten times slowly.
The Smart Targeting procedure could not be
completed.
Ensure that you are working on the
correct axis and that you have not
exceeded the 100 m (300’) working
range.
Axis Alignment does
not work.
The LEDs on the Rod
Eye 180 are flashing
ten times slowly.
The Axis Alignment procedure could not be
completed.
Ensure that you are working on the
correct axis and that you have not
exceeded the 100 m (300’) working
range.
Semi-automatic Cali-
bration does not work.
The LEDs on the Rod
Eye 180 are flashing
ten times slowly.
The Semi-automatic Calibration procedure
could not be completed.
Repeat the procedure. If the proce-
dure is still not successful, contact
an authorised service centre.
Alert Symptom Possible causes and solutions
007752_001
007753_001
007600_001
007754_001
007604_001
007745_001
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica Rugby 870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica Rugby 870 in the language / languages: English as an attachment in your email.

The manual is 12,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info