636417
19
Zoom out
Zoom in
Previous page
1/44
Next page
Rugby 410/420 DG 19Checking Level Accuracy
Checking the Y-Axis Align the Y-axis by rotating the Rugby 90° so that the Y-axis is now
square to the wall. Allow the unit to self-level completely, then check the
Y-axis in the same way as above.
5.2 Adjusting Level Accuracy
To Enter Adjust-
ment Mode
With the unit turned off, press and hold both the Up and Down buttons,
then press the Power button to put the unit in adjustment mode.
X-Axis Accuracy
Adjustment
If entered correctly, the X-axis adjustment screen will appear.
When entering the adjustment screen, a small hour glass will appear.
Wait until the hour glass disappears before checking and changing the
adjustment numbers.
Use the Up and Down arrows to change the number and move the beam
to the half-way point between the positions marked for the X-Axis. Five
counts in the display are equal to approximately 1/16” at 100 feet
(1.5 mm at 30 meters).
Press the Star button to accept this position and accept the number in
the display for the X-Axis.
Press the Star button again to move to the Y-Axis adjustment screen.
Y-Axis Accuracy
Adjustment
If entered correctly, the Y-axis adjustment screen will appear.
Wait until the hour glass disappears before checking and changing the
adjustment numbers.
Use the Up and Down arrows to change the number and move the beam
to the half-way point between the positions marked for the Y-Axis.
Press the Star button to accept this position and accept the number in
the display for the Y-Axis.
Press the Star button again to accept, save, store the adjustment
activity, and to return to the main display screen.
)
After adjustment, always check your work.
)
Always check accuracy prior to critical applications. Repeated activation
of the grade mechanism may result in accuracy variations up to ± 20 arc
seconds.
)
Pressing the power button at any time before completing the procedure
will revert the accuracy to previously saved information.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica Rugby 420DG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica Rugby 420DG in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info