636416
13
Zoom out
Zoom in
Previous page
1/44
Next page
Rugby 410/420 DG 13Setup
4 Setup
4.1 General Setup
Location Make sure the location is clear of possible obstructions that may block
or reflect the laser beam.
Make the most efficient use of the Rugby’s operating radius. The Rugby
can be placed in the center of the working area or to one side.
Make sure the ground is stable. Ground vibration and extremely windy
conditions can affect the operation of the Rugby.
If working in very dusty conditions, place the Rugby up-wind. The dirt and
will then be blown away from the Rugby and reduce interference.
Recommended
Head Speeds
For surveying and manual machine control applications the typical head
speed is 10 rps (600 rpm).
For automatic machine control applications it is recommended to use the
highest head speed, 20 rps, to increase the frequency of updates.
When working at extended distances, decreasing the head speed
(increasing the pulse time on the receiver) or changing the band width
of the receiver to wide band can improve distance and performance.
Tripod Setup Attach the Rugby securely to a tripod or laser trailer, or mount on a
stable level surface.
Always check the tripod or trailer before beginning work.
Make sure all screws, bolts, and nuts are tight.
If your tripod has chains, they should be slightly loose to allow for
thermal expansion during the day.
On extremely windy days, secure the tripod. Placing a sandbag on each
leg can do this. (See also adjustment for setting the wind sensitivity of
the Rugby.)
If using a tripod with a quick disconnect adapter, point the control lever
into the wind. This places the locking mechanism also into the wind, and
will provide better stability.
4.2 Setup Options
The Rugby has several setup options that are easily accessed and
changed in the first setup screen.
From the main operating screen, Press STAR to access the
setup screen.
Head Speed Selections –
5, 10, 15, 20 rps.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica Rugby 410DG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica Rugby 410DG in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info