Manual Leica RANGEMASTER CRF 1200 (page 19 of 74) (English, German, Dutch, French, Italian, Spanish)

595018

Zoom out

Zoom in

1/74

english

Distance measurement

To measure the distance to an object, it must be per-

fectly targeted. To do this, activate the target mark

by pressing the release button (3) once. The target

mark remains lit for about 4 seconds after letting the

release button go.

If the button is kept pressed, the target mark re-

mains lit.

While the target mark is lit, aim the Leica Range–

master CRF at the object and press the release but -

ton a second time; the distance is then measured

and displayed. The target mark disappears briefly

during the measurement. A new measurement can

be made at any time, as long as the target mark is

lit, by pressing the release button once again. If the

object is less than 10m/11yds away, out of range,

or does not provide enough reflection, then

“- - -” appears on the display. The Leica Rangemaster

CRF switches itself off as soon as the display disap-

pears.

Scan mode

With the Leica Rangemaster CRF, continuous mea-

surements can also be made: If the release button

(3) is held down the second time it is pressed, the

unit switches to scan mode after approx. 0.5

seconds and then takes continuous measurements.

This is indicated by the changing display: a new mea-

sured value is produced around every 0.5 seconds.

Scan mode is particularly practical when measuring

to smaller and moving targets.

Note:

Due to the constant measurements, the power con-

sumption is greater in scan mode than for single

measurements.

Inhalt Rangemaster.qxp:Inhalt Rangemaster.qxp 05.02.2009 7:42 Uhr Seite 17

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Leica RANGEMASTER CRF 1200 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Leica RANGEMASTER CRF 1200 Manual

Product: