Manual Leica PINMASTER II (page 26 of 116) (English, German, Dutch, French, Italian, Spanish)

595024

Zoom out

Zoom in

1/116

DISTANCE MEASUREMENT

To measure the distance to an object, it must be

perfectly targeted. To do this, activate the target mark

by pressing the main button (2) once. The target mark

remains lit for about 4 seconds after letting the main

button go. If the button is kept pressed, the target

mark remains lit.

While the target mark is lit, aim the LEICA PINMAS-

TER at the object and press the main button a sec ond

time; the distance is then measured and displayed. The

target mark disappears briefly during the

measurement. A new measurement can be made at

any time, as long as the target mark is lit, by pressing

the main button once again. If the object is less than

10 m/11yds away, out of range, or does not provide

enough reﬂection, then _ _ _ appears on the display.

The LEICA PINMASTER switches itself off as soon as

the display disappears.

SCAN MODE

With the LEICA PINMASTER, continuous measure-

mentscanalsobemade:Ifthemainbutton(2)isheld

down the second time it is pressed, the unit switches

to scan mode after approx. 0.5 seconds and then

takes continuous measurements. This is indicated by

thechangingdisplay:anewmeasuredvalueisprodu-

ced around every 0.5 seconds.

Scan mode is particularly practical when measuring to

ﬂagsticks or other smaller targets.

Note:

In scan mode, due to the constant measurements,

the power consumption is greater than for single

measurements.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Leica PINMASTER II in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Leica PINMASTER II Manual

Product: