495453
169
Zoom out
Zoom in
Previous page
1/184
Next page
Care instructions / 165
MONITOR
The monitor is manufactured using a high-precision
process. This ensures that, of the total of around
230,000 pixels, more than 99.995% work correctly
and only 0.005% remain dark or are always light.
However, this is not a malfunction and it does not
impair the reproduction of the picture.
If the Leica M9 is exposed to signicant tempera-
ture uctuations, condensation can form on the
monitor. Wipe it carefully with a soft dry cloth.
If the Leica M9 is very cold when switched on, the
monitor will initially be slightly darker than normal.
It will revert to its normal brightness once it has
warmed up.
SENSOR
Cosmic radiation (e.g. on ights) can cause pixel
defects.
CONDENSATION
If condensation has formed on or in the Leica M9,
you should switch it o and leave it to stand at room
temperature for around an hour. Once the camera
temperature has adjusted to room temperature, the
condensation will disappear by itself.
CARE INSTRUCTIONS
As any soiling also represents a growth medium for
microorganisms, you should take care to keep the
equipment clean.
FOR THE CAMERA
Only clean the Leica M9 with a soft, dry cloth.
Stubborn dirt should rst of all be covered with a
well-thinned cleaning agent and then wiped o with
a dry cloth.
To remove stains and ngerprints, the camera and
lens should be wiped with a clean lint-free cloth.
Tougher dirt in hard to reach corners of the camera
body can be removed with a small brush. Be careful
not to damage the shutter blades, for instance with
the shaft of the brush.
All mechanically operated bearings and sliding
surfaces on your Leica M9 are lubricated. Please
re member this if you will not be using the camera
for a long period of time. To prevent the lubrication
points becoming gummed up, the camera shutter
should be released a number of times every three
months. It is also recommended that you repeatedly
move and use all other controls, such as the image
eld selector. The distance and aperture setting
rings on the lens should also be moved periodically.
Take care not to scratch the sensor for the 6-bit
coding (1.10) in the bayonet, or to get it dirty. Take
care also that no grains of sand or similar particles
enter the fastening, where they could scratch the
bayonet. Never wet this component when cleaning it!
169


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica M9P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica M9P in the language / languages: English, German as an attachment in your email.

The manual is 34,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica M9P

Leica M9P User Manual - Dutch, French - 185 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info