495455
125
Zoom out
Zoom in
Previous page
1/170
Next page
123
EXPOSURE METERING
On the Leica M Monochrom, exposure metering for the
available ambient light is done through the lens with the
working aperture. The light reflected by bright shutter
diaphragm blades in the first shutter curtain is captured
by a photo diode and measured. This silicon photo
diode with forward-facing convex lens is positioned at
the center lower edge, on the camera base.
The speed / aperture combinations for a correct
exposure are specified by the viewfinder or monitor
displays or are determined with their assistance.
In aperture priority mode the aperture is selected
manually, and the camera then determines the
appropriate shutter speed automatically. In this mode, a
digital LED display indicates the resulting shutter speed
(e.g.
1000)
If both values are set manually, a light balance made up
of three red LEDs ( ) is used to correct the exposure.
When the setting is correct, only the central circular
LED is lit up.
TURNING THE EXPOSURE METER ON/OFF
The exposure meter is turned on by gently pressing the
shutter release button (1.19) to its 1st pressure point,
provided the camera is turned on at the main switch
(1.18) and the shutter speed setting dial (1.17) is not
set to
B
.
One of the displays in the viewfinder lights up
continuously to indicate that the exposure meter is
ready:
– In aperture priority mode, the digital LED display of
the shutter speed,
– and in manual mode one of the two triangular LEDs
lights up, either individually or in conjunction with the
center circular LED.
If you let go of the shutter release button without
activating the shutter, the exposure meter remains
turned on for around 12s more, and the relevant LED(s)
remain lit for the same time.
If the shutter speed setting dial is set to
B
the exposure
meter is disabled.
Notes:
If the displays go out, the camera is in “standby”
mode.
With very little ambient light, i.e. at the limits of the
exposure meter’s range, it can take around 0.2s for
the LEDs to light up.
In aperture priority mode, if the correct exposure
cannot be achieved using the available shutter
speeds, the shutter speed display flashes as a
warning (for more details, refer to the “Aperture
priority mode” section on p. 124).
When making manual settings, if you are below the
exposure meter’s metering range at very low light
densities, the left-hand triangular LED flashes as a
warning. In aperture priority mode, the shutter speed
is still displayed. If the required shutter speed falls
below the slowest possible setting of 32s, this display
also flashes.
If the camera is out of use for an extended period
or is stored in a case, always turn it off at the main
switch. This prevents any power consumption,
including that which continues to occur in standby
mode after the exposure meter is turned off
automatically and the display is extinguished. This
also prevents pictures from being taken accidentally.
For optimum pictures, we recommend making
sure that bright sections of the image are not
overexposed. This can be done very easily using the
clipping display (see p. 140).
125


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica M Monochrom at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica M Monochrom in the language / languages: English, German as an attachment in your email.

The manual is 7,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica M Monochrom

Leica M Monochrom User Manual - Dutch, French - 170 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info