495452
116
Zoom out
Zoom in
Previous page
1/178
Next page
114
SHUTTER RELEASE BUTTON
The shutter release button (1.18) has three pressure
points:
1. Briefly pressing to the first pressure point activates
exposure metering and viewfinder displays, and
starts a pre-set self timer delay time, if this has
been programmed (see p. 157).
When you let go of the shutter release button, the
metering system and the displays remain activated
for around a further 12s (for more details, refer to
the sections under “Exposure metering” starting on
p. 135).
If the shutter release button is kept at this pressure
point, the displays remain active, or if the camera
was previously set to review mode (see p. 150), it
switches back into picture mode. If the camera was
previously in standby mode (see p. 112), it will be
reactivated and the displays switched on.
While the shutter release is held in this position,
you can use the setting dial (1.27) to quickly and
easily set an exposure compensation (for more
details, refer to the “Exposure compensation”
section on p. 137).
Note:
The shutter release is locked
if the internal buffer memory is (temporarily) full,
e.g. after a series of more than 8 pictures, or
if the installed memory card and the internal buffer
memory are (temporarily) full.
2. Pressing to the second pressure point saves the
exposure metering value in aperture priority mode,
i.e. the shutter speed determined by the camera
(for more details, refer to the section “Metering
memory lock” on p. 136). Once you let go of the
shutter release button, a new metered value can be
determined.
3. Pressing the shutter release button all the way
down takes a picture. The data is then transferred
to the memory card.
The shutter release button has a standard thread
(1.18a) for a cable release.
Notes:
The second pressure point is not perceptible when
using a cable release.
Even if review mode (see “Selecting picture and
review modes”, p. 113) or menu control (see p.
119) was previously activated, pressing the shutter
re lease button causes the camera to switch imme
-
diately into picture mode.
Menu control allows you to select or set button
acknowledgement (feedback) tones (see p. 123).
To avoid blurring, the shutter release should be
pressed gently – not jerkily, until the shutter is
released with a soft click.
1.18a1.18
116


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica M-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica M-E in the language / languages: English, German as an attachment in your email.

The manual is 7,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica M-E

Leica M-E User Manual - Dutch, French - 178 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info