532141
21
Zoom out
Zoom in
Previous page
1/60
Next page
23
DISTO pro
4
/ pro
4
a-1.0.0en
English
en
After a brief press on the Enter key a
confirmation appears and the menu
is terminated.
The DISTO changes into Normal
mode and displays the symbol of the
time delay release in basic settings.
The delay can also be set in the
Pointing mode:
Keep pressed, until the
desired delay is reached.
The uppermost line displays the
symbol of the time delay release with
the delay below it.
Upon release the remainig seconds
to the measurement is displayed
(e.g. 59, 58, 57,...).
The last 5 seconds are counted
down with a beep sound. After the
last beep the measurement takes
place and the measured value is
displayed.
Measurement settings, contd.
Permanent (1.3.2)
After calling up this menu function,
the following is displayed:
The suggested delay is for all
following measurements and can be
changed as follows:
With the navigation keys.
Each key press increases,
respectively decreases delay
by 1 second.
With a keypad entry.
As long as this key is
pressed the delay increases
until the maximum of 60
seconds is reached.
After a brief press on the Enter key a
confirmation appears and the menu
function is terminated.
Here the operational mode of the
laser is set.
Normal mode: The laser switches off
automatically after 30 seconds.
Permanent mode: The laser remains
on in Pointing mode as long as the
DISTO is on.
The DISTO changes into Normal
mode and displays the symbol of the
time delay release in basic settings.
None (1.3.3)
After pressing the Enter key the
permanent delay is deleted and the
menu function terminated.
Laser (1.4)
Default setting: normal (1.4.1)
Normal mode (1.4.1)
After pressing the Enter key the
menu funtion is terminated and
basic settings are displayed.
This symbol appears in basic
settings as long as the laser
is on.
Permanent (1.4.2)
After pressing the Enter key the
menu is terminated and basic
settings are displayed.and the Per-
manent mode is started.
Every press on the On and
measurement key immediately
triggers a measurement.
This symbol is permanently
displayed in basic settings.
Only activate permanent
mode of laser if required as it
uses up battery power very rapidly.
10 sec
permanent 1.3.2
laser 1.4
1 normal mode
2 permanent
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica DISTO PRO 4a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica DISTO PRO 4a in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica DISTO PRO 4a

Leica DISTO PRO 4a User Manual - German - 60 pages

Leica DISTO PRO 4a User Manual - Dutch - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info