532134
6
Zoom out
Zoom in
Previous page
1/10
Next page
3
Measuring
Leica DISTO™ A3 1.1.0 gb
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
RC
ROK
PL
H
RUS
CZ
CLEAR Key
Pushing the CLEAR - key {A, 5} clears the last entry
or measurement. Within a function (area, volume,
etc.) single measurements can be deleted step by
step and re-measured.
Illumination
Pressing the ILLUMINATION - key {A, 6} turns on the
display backlight. Another press turns it off again.
Switching off the device (or automatic switch off)
also turns off the light.
Reference Setting
The default reference setting is from the rear of the
instrument. By pressing the REFERENCE - key {A, 4},
the setting can be changed, so that the next
measurement taken will be from the "front" of the in-
strument. Afterwards the reference setting automat-
ically defaults back to rear. See picture {D}.
Measuring
Single Distance Measuring
Pressing DIST - key {A, 1} turns the laser on. Aim at
the desired target and press DIST - key {A, 1} again.
The measured distance is displayed immediately in
the chosen unit.
Minimum/Maximum Measuring
This function allows the user to measure the
minimum or maximum distance from a fixed
measuring point as well as to determine spacing - see
figure {E}. It is commonly used to measure diagonal
distances (maximum values) or horizontal distances
(minimum values).
Press and hold DIST - key {A, 1} until you hear a
beep, indicating the device is in a continuous
measuring mode. Then slowly sweep the laser back
and forth respectively up and down over the desired
target point - see figure {F, G} - (e.g. a corner in the
room).
Press DIST - key {A, 1} again and the continuous
measurement will be stopped. The current values for
maximum and minimum distances are shown in the
display as well as the last measured value in the main
line.
Functions
Addition / Subtraction
Take the first measurement, addition is executed by
pressing the PLUS - key {A, 2} and subtraction by
pressing the MINUS - key {A, 8}, then take the next
measurement. This process can be repeated as many
times as is required. The result is displayed in the
main line, whilst the last measurement taken is also
displayed. Pushing the CLEAR - key {A, 5} undoes the
last step.
6


Need help? Post your question in this forum.

Forumrules
1

Forum

leica-disto-a3

Reset search

  • Where could have my Leica DISTO A5 fixed in Toronto, Ontario? Submitted on 11-11-2022 at 23:00

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica DISTO A3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica DISTO A3 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica DISTO A3

Leica DISTO A3 User Manual - German - 10 pages

Leica DISTO A3 User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info