67240
115
Zoom out
Zoom in
Previous page
1/136
Next page
Others
115
Troubleshooting
If you return the menu settings to the initial
settings at the time of purchase, the
condition may improve.
Select [RESET] in the [SETUP] menu.
(P29)
w Battery and power source
1: The camera cannot be operated even
when it is turned on.
Is the battery inserted correctly? Is the
AC adaptor connected correctly?
Is the battery sufficiently charged?
Charge the battery or use one that
has been sufficiently charged.
2: The LCD monitor turns off while the
camera is turned on.
The camera turns off arbitrarily.
Is power save mode (P28) activated?
Press the shutter button halfway to
cancel this mode.
Is the battery exhausted?
Charge the battery or replace it with a
battery which has enough capacity.
3: The camera turns off immediately
after it is turned on.
Is the battery charge insufficient to
operate the camera?
Charge the battery or use one that
has been sufficiently charged.
If you leave the camera on, the battery
will be exhausted. Turn the camera off
frequently by using power save mode
(P28) etc.
w Recording
1: The picture cannot be recorded.
The shutter does not activate.
Is the card inserted?
Is there any memory remaining on the
card?
Before recording, delete some
pictures. (P45)
Is the subject focused?
At the time of purchase, the camera is
set so that you cannot take a picture
until the subject is brought into focus.
If you want to be able to take a picture
when you press the shutter button
fully even if the subject is not focused,
set [FOCUS PRIORITY] in the
[CUSTOM] menu to [OFF]. (P86)
2: The recording mode ([ ], [ ],
[ ], [ ]) cannot be set correctly.
Is the lens attached correctly?
Detach the lens and attach it again.
(P16)
3: The subject is not focused properly.
Is the subject beyond the focus range of
the camera? (P34)
Have you taken a picture with jitter?
Is [FOCUS PRIORITY] in the
[CUSTOM] menu set to [OFF]? (P86)
In this case, the picture may not be
properly focused even if [AFS] or
[AFC] in focus mode is set.
4: The recorded picture is whitish.
The lens is dirty.
The picture can become whitish if there
is dirt e.g. fingerprints on the lens. If the
lens is dirty turn the camera off and
then gently wipe the lens surface with a
soft dry cloth.
5: The recorded picture is too bright or
dark.
Check that the exposure is correctly
compensated. (P40)
115


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica Digilux 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica Digilux 3 in the language / languages: English as an attachment in your email.

The manual is 5,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica Digilux 3

Leica Digilux 3 User Manual - Dutch - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info