Detailed guide / Review mode / 174
4. Return to the picture by pressing right on the
direction pad.
If it is possible to reduce the resolution, the
following monitor screen appears:
Note:
While carrying out step 4 you can also select the
other pictures using right and left on the direction
pad, so that you can also change the trimming for
them.
If it is not possible to change the trimming (for the
reasons given above under “Notes”), the monitor
screen above appears with the following
differences:
-
CAN’T TRIM THIS PICTURE is displayed in the
center of the screen, and
-on the bottom line, only
CANCEL: MENU is
shown to indicate how you can exit this menu
level.
The following step is only necessary if it is not
possible to change the trimming. Otherwise, you
can continue as described in point 6 onwards.
5. In such cases, select one of the other pictures,
for which you want to change the trimming, by
pressing left or right on the direction pad.
The following step is only necessary if you want to
reduce the resolution by more than one level.
Otherwise, you can continue as described in point
7 onwards.
6. Select the desired resolution by pressing up
and/or down on the direction pad. Depending
on whether only a lower resolution, only a higher
resolution or both is available, yellow arrows
pointing downwards, upwards or both appear
either below, above or below and above the
suggested resolution, to indicate the setting
options.
1600 = 1600 x 1200
1120 = 1120 x 840
640 = 640 x 480
Note:
The lower the selected resolution, the smaller
the resulting, center trimming. The smaller the
trimming, the more it can be moved from center
in step 8.
7. Press the
VIEW/SET button.
The displays described above in point 4 appear
on the monitor, along with
a yellow arrow pointing outwards at the edge of
the monitor in the center, to indicate how the
trimming can be changed.
8. Select desired trimming by using the direction
pad.
On the monitor, the image “moves” in the
direction you press on the direction pad.
