532121
62
Zoom out
Zoom in
Previous page
1/74
Next page
3D Disto, Error Messages
62
7 Error Messages
Error messages and
advice
Error No. Advice
150 Working range was exceeded.
151 Invalid measurement.
152 Change the 3D Disto position or use ruler for offset points.
160 Repeat and do not move the ruler between both measurements.
161 In some cases the Offset Point tool can not be used.
170 Restart 3D Disto if the problem persists.
171 Check all devices, for example power supply or cables, and try again.
240 Tilt sensor calibration was not successful. System accuracy is at risk.
Contact your distributor or Leica Geosystems representative.
241 Too much drift. Repeat calibration precisely.
243 Set up the instrument stably. Do not touch or rotate the 3D Disto. Repeat
calibration.
300 Select a horizontal line.
350 Check projection surface. Laser could not reach the correct position.
755 Point cannot be measured. Try different position. Tool does not work on
horizontal planes.
760 Point cannot be measured. Enter different values. Tool does not work on
horizontal planes.
765 Point cannot be measured. Try different position or enter different value.
Tool does not work on horizontal planes.
800 Data import or export is not possible.
801 Not enough memory on USB stick.
802 Storage device does not work properly.
803 Check file condition and content.
804 File or Folder write-protected or damaged.
900 3D Disto error. Contact your distributor or Leica Geosystems representa-
tive if the error repeats.
901 The reflected laser signal is too low.
902 The reflected laser signal is too high.
903 Too much background light.
904 Laser beam interrupted. Repeat measurement.
950 Execute Location Check to retain accuracy!
951 3D Disto tilt is over 3°. Set up horizontally!
952 Check 3D Disto, check for obstacles interrupting WLAN connection, or
move towards 3D Disto.
953 Check connection and cable.
954 Plug in cable or choose “WLAN” in the menu.
955 3D Disto temperature out of working range.
956 Too much vibration or permanent movement.
998 Contact your distributor or Leica Geosystems representative.
999 Contact your distributor or Leica Geosystems representative.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leica 3D Disto at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leica 3D Disto in the language / languages: English as an attachment in your email.

The manual is 4,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Leica 3D Disto

Leica 3D Disto User Manual - German - 214 pages

Leica 3D Disto User Manual - Dutch - 220 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info