691329
196
Zoom out
Zoom in
Previous page
1/200
Next page
The Apollo Program
On May 25, 1961, President John F. Kennedy
challenged his country to safely send and return an
American to the Moon before the end of the decade.
NASA met that challenge with the Apollo program.
It would be the first time human beings left Earth
orbit and visited another world. The Apollo program
played a crucial role in space exploration and made
it possible to explore more distant worlds further
in the future.
The Apollo program consisted of 11 spaceflights.
The first two missions, Apollo 7 and 9, were Earth-
orbiting missions used to test the Command
and Lunar Modules. The next two, Apollo 8 and
10, tested various components while orbiting
the Moon, also taking photographs of the lunar
surface. While Apollo 13 did not land on the moon
due to a malfunction, a total of six other missions
did and returned with a wealth of scientific data
and almost 881.8 lbs (400 kilos) of lunar samples.
The first manned mission to the moon was Apollo
8. It circled around the moon on Christmas Eve in
1968. Just over six months later on July 20, 1969,
the world witnessed one of the most astounding
technological achievements of the 20th century
when a NASA astronaut on Apollo 11 became the
first human to set foot on the Moon.
The Apollo 11 mission lasted 195 hours, 18 minutes
and 35 seconds - about 36 minutes longer than
planned. After lunar orbit insertion, the Command
Module (CM) and Lunar Module (LM) separated.
While one crewmember remained in the CM, which
orbited the Moon, the other two astronauts made
the historic journey to the lunar surface in the
LM. After exploring the surface and setting up
experiments for 21 hours and 36 minutes, the
astronauts returned safely to the CM and began
the journey back to Earth.
The Saturn V moves at one mile per hour
down the crawlerway toward pad 39A
Workers prepare the S-IC first stage
in the transfer aisle of the Vehicle
Assembly Building
Photographers film the Apollo 11 rollout
Pre-flight training
Kennedy Space Center technicians
inspect the LRV.
Saturn V was the most powerful rocket that
had ever flown successfully and was used in
the Apollo program in the 1960s and 1970s. The
rocket was 363 ft. (111 m) tall and weighed 6.2
million lbs (2.8 million kilos) when fully fueled
for lifto. The Saturn V used for the later Apollo
missions had three stages. Each stage would
burn its engines until it was out of fuel and would
then separate from the rocket. The engines on
the next stage would fire, and the rocket would
continue into space. The first stage had the most
powerful engines, since it had the challenging
task of lifting the fully fueled rocket o the
ground. The first stage lifted the rocket to an
altitude of about 42 miles (68 km). The second
stage carried it from there almost into orbit. The
third stage placed the Apollo spacecraft into
Earth orbit and pushed it toward the moon.
Saturn V
F-1 ENGINES (5)
J-2 ENGINES (5)
S-IC STAGE
S-II STAGE
The S-II second
stage is moved
into position for
mating with the
S-IC first stage
Mating of the Apollo
11 spacecraft to
the Saturn V launch
vehicle
Shortly after the trans-lunar injection
maneuver that placed the Apollo spacecraft
on its trajectory towards the Moon, the
transposition and docking maneuver would
be performed. This involved an astronaut
separating the Apollo Command/Service
Module (CSM) spacecraft from the adapter
which fastened it to its launch vehicle
upper stage, turning it around, and docking
its nose to the Apollo Lunar Module (LM),
then pulling the combined spacecraft
away from the upper stage.
Transposition, docking,
and extraction
J-2 ENGINE
LUNAR MODULE
DESCENT STAGE
APOLLO
COMMAND
MODULE
S-IVB STAGE
INSTRUMENT UNIT
LUNAR MODULE
ASCENT STAGE
APOLLO
SERVICE
MODULE
LAUNCH
ESCAPE
SYSTEM
Lunar Module 5
ascent stage in Final
Assembly area on
overhead hoist
The Apollo 11 CSM
being moved
from work
stand for
mating
The Command/
Service Module (CSM)
separates from the
adapter.
The CSM then turns
around in preparation
for docking with the
Lunar Module (LM)
After docking, the CSM
pulls the LM away from
the launch vehicle’s
upper stage
LIFTOFF
APOLLO SATURN V
ROLLS OUT OF THE
MASSIVE VEHICLE
ASSEMBLY BUILDING
THE FIRST STAGE
FALLS AWAY AS THE
S-II STAGE IGNITES
S-II/S-IVB
SEPARATION.
S-IV ENGINE IGNITION.
CSM 180
O
TURNAROUND.
TRANSLUNAR
INJECTION “GO”
DECISION.
S-IVB ENGINE CUTOFF.
LAUNCH ESCAPE
TOWER JETTISON.
CSM SEPARATION
FROM LM ADAPTER.S-IVB ENGINE CUTOFF.
S-IVB 2ND ENGINE
IGNITION
Journey to the Moon
CSM DOCKING WITH
LM/S-IVB.
SYSTEMS STATUS
CHECKS / EAT AND
SLEEP PERIODS /
DATA TRANSMIT
PERIODS.
COMMANDER
TRANSFER TO LM.
BEGIN NAVIGATION
SIGHTINGS.
LM DESCENT ENGINE
IGNITION.
LM DESCENT ENGINE
IGNITION.
SM ENGINE IGNITION.
SM ENGINE IGNITION.
CSM/LM SEPARATION
3RD ORBIT.
PILOT TRANSFER
TO LM.
LM DESCENT ENGINE
CUTOFF.
TOUCHDOWN
CSM SEPARATION
FROM S-IVB.
With a shared passion for both space
exploration and LEGO® building, Valérie Roche
(aka Whatsuptoday) and Felix Stiessen (aka
Saabfan) worked closely together to create their
impressive Apollo 11 Mission model for LEGO
Ideas.
“The most challenging part was the Lunar Landing
module. I (Felix) tried building it as small as
possible (I wanted it to fit in the half-cone parts
as seen in the model) while still looking good and
accurate. After that, we began building the rocket
around it. We also tried to make the rocket as
sound as possible, so Valérie included pillars and
beams inside for structural integrity.
“It actually took quite a long time to finish the
whole model. There were often times when one
of us just abandoned the project for a few weeks
and came back to it later; however, thanks to
the fact that it is a collaborative project, it was
always the case that one of us continued making
progress on the project and re-motivated the
other. All in all, we would say it took us about a
year to complete.
We were surprised (and happy, of course) when
we learned our model would be the latest one
in the LEGO Ideas series. What we like about the
LEGO Ideas platform is the feedback and support
you get from the community. It’s great to reply to
comments, read suggestions and improve your
model in the updates. Of course, the chance of
designing your own LEGO set is also really cool!”
Fan designers
Felix Stiessen
Valérie Roche
LEGO® designers
Michael Psiaki, Carl Thomas Merriam and Austin
William Carlson are all full-time LEGO® designers
and avid space enthusiasts, so this was a project
they very much wanted to be a part of. As Michael
explains:
We were actually not asked. I was so excited
when I heard that the project was potentially
going to happen, and told Carl about it because
I knew he was also a space fanatic. We decided
it would be really cool to work together since it
is such a big model, so we approached the Ideas
team about helping to develop the product.
We were amazed by how big the actual model
was and how it was able to separate into all of
the dierent stages and components. This was
very dicult to implement in our final design,
since we needed to make sure that the rocket was
strong enough when connected together, but also
easy to separate.
Carl Thomas Merriam (left)
Michael Psiaki (middle)
Austin William Carlson (right)
Le programme Apollo
Le 25 mai 1961, le président des États-Unis John F.
Kennedy lança le défi suivant à son pays : parvenir,
avant la fin de la décennie, à envoyer un Américain
sur la Lune et à le faire revenir, en toute sécuri.
Le programme Apollo permit à la NASA de relever
ce défi. Pour la première fois, des êtres humains
quittèrent l’orbite de la Terre pour partir explorer
un autre monde. Le programme Apollo joua un rôle
essentiel dans l’exploration spatiale et permit, par
la suite, d’étudier des univers plus lointains.
Dans le cadre du programme Apollo, 11 voyages
dans l’espace furent organisés. Les deux premières
missions, Apollo 7 et 9, qui consistaient en des
voyages en orbite autour de la Terre, avaient
pour objectif de tester les modules lunaire et de
commande. Les deux missions suivantes, Apollo 8
et 10, visaient à tester des composants en orbite
autour de la Lune et à prendre des clichés de la
surface lunaire. Même si une défaillance empêcha
le vaisseau de la mission Apollo 13 d’atterrir sur
la Lune, au total, six autres missions réussirent,
et revinrent sur Terre avec une grande quantité
de données scientifiques et ps de 400 kg
d’échantillons lunaires.
La première mission habitée vers la Lune fut Apollo 8.
Au cours de cette mission menée en 1968, le
vaisseau tourna autour de la Lune la veille de Noël.
Un peu plus de six mois plus tard, le 20 juillet 1969,
le monde entier assista à l’une des plus incroyables
prouesses technologiques du XX
e
siècle lorsque,
dans le cadre de la mission Apollo 11, un astronaute
de la NASA devint le premier homme à marcher sur
la Lune.
La mission Apollo 11 dura 195 heures, 18 minutes
et 35 secondes, c’est-à-dire environ 36 minutes de
plus que pvu. Après leur mise sur orbite lunaire,
les modules de commande et lunaire se séparèrent.
Tandis que l’un des membres de l’équipage resta
dans le module de commande, les deux autres
astronautes accomplirent le voyage historique
vers la surface de la Lune à bord du module lunaire.
Après avoir exploré la surface et mis en place des
exriences pendant 21 heures et 36 minutes, les
astronautes rejoignirent le module de commande
en toute sécurité avant de commencer le voyage de
retour vers la Terre.
Le lanceur Saturne V se déplace à
1,6 kilomètre par heure le long de la
route Crawlerway vers
la rampe de lancement 39A
Les travailleurs préparent le premier
étage S-IC dans l’aile de transition du
bâtiment d’assemblage des véhicules
Les photographes filment le
lancement d’Apollo 11
Formation de vol
Les techniciens du centre spatial
Kennedy inspectent le Rover lunaire
La fusée Saturne V est la plus puissante à avoir
jamais réussi à voler. Elle fut utilisée dans le
cadre du programme Apollo dans les anes
1960 et 1970. Elle mesurait 111 mètres de haut
et pesait 2,8 millions de kilos lorsque ses
servoirs de carburant étaient pleins ; condition
nécessaire à son décollage. La fusée Saturne V,
utilisée pour les dernières missions Apollo,
comptait trois étages. Les moteurs de chaque
étage brûlaient la totalité du carburant qu’ils
renfermaient avant de se détacher de la fusée.
Les moteurs de l’étage suivant prenaient ensuite
le relais, et la fusée poursuivait son voyage dans
l’espace. Les moteurs du premier étage étaient
les plus puissants, car cétait à eux qu’incombait
la tâche dicile de faire s’élever la fusée alors
que ses réservoirs de carburant étaient pleins.
Le premier étage permettait de faire monter la
fusée à environ 68 km d’altitude. Le deuxième
prenait le relais à partir de là pour emmener
la fusée presque jusqu’en orbite. Le troisième
mettait le vaisseau Apollo en orbite autour de la
Terre et le poussait vers la Lune.
Saturne V
MOTEURS F-1 (5)
MOTEURS J-2 (5)
ÉTAGE S-IC
ÉTAGE S-II
Le deuxième
étage S-II
est placé en
position pour
l’accouplement
avec le premier
étage S-IC
Accouplement de
la navette spatiale
Apollo 11 au lanceur
Saturne V
Peu de temps après la manœuvre
d’injection translunaire, qui permettait de
mettre le vaisseau spatial Apollo sur sa
trajectoire vers la Lune, les manœuvres
de transposition et d’amarrage étaient
exécutées. Pour ce faire, l’un des
astronautes devait détacher le module
de commande et de service Apollo de
l’adaptateur qui le reliait à l’étage supérieur,
responsable du décollage. Afin d’y parvenir,
l’astronaute devait faire tourner le module
et en amarrer la tête au module lunaire
Apollo, puis détacher le vaisseau ainsi
combiné de l’étage supérieur.
Transposition, amarrage
et extraction
MOTEUR J-2
ÉTAGE DE DESCENTE
DU MODULE LUNAIRE
MODULE DE COMMANDE
D’APOLLO
ÉTAGE S-IVB
INSTRUMENT UNIT
ÉTAGE DE REMONTÉE
DU MODULE LUNAIRE
MODULE DE SERVICE
D’APOLLO
TOUR DE
SAUVETAGE
Létage de remontée
du module lunaire 5
dans la zone
d’assemblage final,
soulevé par un palan
Le module de
commande
et de service
d’Apollo 11
déplacé de
l’échafaud de
travail pour
l’accouplement
Le module de
commande et de
service (CSM) se sépare
de l’adaptateur
Le CSM se retourne
ensuite et se prépare
pour l’amarrage au
module lunaire
Après l’amarrage, le
CSM pousse le module
lunaire pour l’éloigner
de l’étage supérieur du
lanceur
DÉCOLLAGE
LE LANCEUR D’APOLLO,
SATURNE V, SORT DE
L’ÉNORME BÂTIMENT
D’ASSEMBLAGE DES
VÉHICULES
LE PREMIER ÉTAGE
SE DÉTACHE À
L’ALLUMAGE DE
L’É TAGE S-II
SÉPARATION ENTRE
S-II ET S-IVB /
ALLUMAGE DU
MOTEUR S-IV
ROTATION À 180°
DU CSM
CISION D’ENTAMER
L’INJEC TION
TRANSLUNAIRE
EXTINCTION DU
MOTEUR S-IVB
LARGAGE DE LA TOUR
DE SAUVETAGE
SÉPARATION
ENTRE LE CSM ET
L’ADAPTATEUR DU
MODULE LUNAIRE
EXTINCTION DU
MOTEUR S-IVB
ALLUMAGE DU
DEUXIÈME MOTEUR
S-IVB
En route pour la Lune
AMARRAGE
DU CSM AU
MODULE
LUNAIRE/S-IVB
VÉRIFICATIONS
DE L’ÉTAT DES
SYSTÈMES/
PÉRIODES DE
RAVITAILLEMENT
ET DE REPOS/
PÉRIODES DE
TRANSMISSION DE
DONNÉES
TRANSFERT DU
COMMANDANT AU
MODULE LUNAIRE
BUT DES
OBSERVATIONS
DE NAVIGATION
ALLUMAGE DU
MOTEUR DE
DESCENTE DU
MODULE LUNAIRE
ALLUMAGE DU
MOTEUR DE
DESCENTE DU
MODULE LUNAIRE
ALLUMAGE DU
MOTEUR DU MODULE
DE SERVICE
ALLUMAGE DU
MOTEUR DU MODULE
DE SERVICE
SÉPARATION ENTRE
LE CSM ET LE MODULE
LUNAIRE (3
e
ORBITE)
TRANSFERT DU
PILOTE AU MODULE
LUNAIRE
EXTINCTION
DU MOTEUR DE
DESCENTE DU
MODULE LUNAIRE
ALUNISSAGE
SÉPARATION
ENTRE LE CSM
ET LE S-IVB
Partageant une passion pour l’exploration spatiale et
les constructions LEGO®, Valérie Roche (aussi connue
sous le nom de Whatsuptoday) et Felix Stiessen (aussi
connu sous le nom de Saabfan) ont travaillé en étroite
collaboration pour créer leur impressionnant modèle
inspiré de la mission Apollo 11 pour LEGO Ideas.
Felix : « La partie la plus dicile à recréer était le module
d’atterrissage lunaire. J’ai essayé de faire en sorte qu’il
soit le plus petit possible (je voulais que l’on puisse
l’insérer dans les pièces en forme de demi-cône, comme
on peut le voir sur le modèle) tout en restant beau et
fidèle au vaisseau d’origine. Après cela, nous avons
commencé à construire la fusée en tenant compte
des dimensions de ce module. Nous avons également
tenté de rendre la fusée aussi solide que possible. C’est
pourquoi Valérie a inclus des colonnes et des poutres à
l’intérieur pour renforcer l’intégrité structurale. »
« La finalisation de la totalité du modèle nous a pris
beaucoup de temps. Il est souvent arrivé que l’un d’entre
nous abandonne tout simplement le projet pendant
quelques semaines pour y revenir plus tard. Toutefois,
étant donné qu’il s’agit d’une collaboration, il y avait
toujours quelqu’un qui faisait avancer le projet, ce qui
remotivait l’autre. Au total, il nous a fallu environ un an
pour mener le projet à bien. »
« Nous avons été surpris (et heureux, bien sûr) lorsque
nous avons appris que notre modèle intégrerait la
gamme LEGO Ideas. En ce qui concerne la plate-
forme LEGO Ideas, nous aimons le fait de recevoir des
commentaires et le soutien de la communauté. C’est
super de pouvoir répondre aux commentaires, lire des
suggestions et améliorer le modèle grâce à la section
“Updates”. Bien entendu, la possibilité de créer son propre
ensemble LEGO est, elle aussi, vraiment géniale ! »
Felix Stiessen
Fans designers
Valérie Roche
Designers LEG
Michael Psiaki, Carl Thomas Merriam et Austin
William Carlson sont tous designers LEGO® à
temps plein et des fans inconditionnels de
l’espace. Il s’agissait donc d’un projet auquel ils
avaient vraiment envie de participer. Michael
explique d’ailleurs :
« En réalité, on ne nous a rien demandé. Jétais
véritablement enthousiaste lorsque j’ai entendu
dire que le projet allait peut-être se concrétiser et
j’en ai parlé à Carl, car je savais qu’il était aussi
fan de l’espace. Nous nous sommes dit qu’il serait
vraiment sympa de travailler ensemble vu la
taille imposante du modèle, c’est pourquoi nous
avons contacté léquipe chargée des projets Ideas
afin de les aider à développer le produit. »
« Nous avons été impressionnés par la taille
réelle du modèle, ainsi que par la façon dont il
est possible d’en séparer les diérents étages
et composants. Il n’a vraiment pas été facile
d’intégrer cette spécificité dans notre modèle
final, car nous devions nous assurer que la fusée
soit susamment solide une fois assemblée,
mais également qu’elle soit facile à diviser. »
Carl Thomas Merriam (à gauche)
Michael Psiaki (au milieu)
Austin William Carlson (à droite)
El programa Apolo
El 25 de mayo de 1961, el presidente John F. Kennedy
desafió a su país a enviar a un americano a la Luna
y traerlo de vuelta sano y salvo antes del final
de esa década. La NASA aceptó el desafío con el
programa Apolo. Sería la primera vez que un ser
humano abandonase la órbita de la Tierra y visitase
otro mundo. El programa Apolo interpretó un
papel fundamental en la historia de la exploración
espacial y abrió las puertas a la posibilidad de
explorar mundos aún más lejanos.
El programa Apolo se componía de 11 vuelos
esp acial es. L as do s primer as misio nes , denomin adas
Apolo 7 y Apolo 9, se desarrollaron en la órbita de la
Tierra y sirvieron para probar el módulo de control
y el módulo lunar. Las dos siguientes, denominadas
Apolo 8 y Apolo 10, tenían por objetivo poner a
prueba diferentes componentes en la órbita de la
Luna y tomar fotografías de su superficie. Aunque
la misión Apolo 13 no llegó a posarse en la Luna
debido a problemas técnicos, sí que lo hicieron
otras seis misiones que volvieron a la Tierra con
gran cantidad de datos cienficos y casi 400 kg de
muestras lunares.
La primera misión tripulada a la Luna fue la Apolo 8,
que describió una órbita completa alrededor del
satélite en la Nochevieja de 1968. Tan sólo seis
meses más tarde, el 20 de julio de 1969, el mundo
fue testigo de uno de los logros tecnogicos más
asombrosos del siglo XX cuando un astronauta de
la NASA a bordo de la nave Apolo 11 se convirtió en
el primer ser humano en pisar la supercie de la
Luna.
La misión Apolo 11 duró 195 horas, 18 minutos y
35 segundos (unos 36 minutos más de lo planeado).
Tras la entrada en la órbita lunar, el módulo de
control (MC) y el módulo lunar (ML) se separaron.
Mientras uno de los miembros de la tripulación
permanecía en el MC, en órbita alrededor de la
Luna, los otros dos astronautas emprendieron el
histórico viaje a la superficie lunar en el ML. Después
de explorar la superficie y realizar experimentos
durante 21 horas y 36 minutos, los astronautas
retornaron sanos y salvos al MC e iniciaron el viaje
de vuelta a la Tierra.
El Saturno V se desplaza a 1,6 km/h
por la vía de transporte hasta la
plataforma 39A
Los operarios preparan la primera fase
(S-IC) en el corredor de transferencia
del Edificio de Ensamblaje de Vehículos
Fotógrafos filman los preparativos de
la misión Apolo 11
Entrenamiento previo al vuelo
Técnicos del Centro Espacial Kennedy
inspeccionan el vehículo de
exploración lunar (VEL)
El cohete Saturno V fue el más potente que jamás
ha volado con éxito y formó parte del programa
Apolo durante las décadas de 1960 y 1970.
Medía 111 m de altura y, con el depósito lleno de
combustible y preparado para el lanzamiento,
pesaba 2,8 millones de kilogramos. El Saturno V
que participó en las posteriores misiones
Apolo se componía de tres fases. Cada fase
debía alimentar sus motores hasta agotar el
combustible para separarse entonces del cohete.
A continuación, se ponían en marcha los motores
de la siguiente fase, permitiendo al cohete
continuar su viaje hacia el espacio. La primera
fase contaba con los motores más potentes,
pues su desafiante tarea era levantar el cohete
del suelo con el desito lleno de combustible.
De este modo, era capaz de elevar el cohete a
una altura de unos 68 km. A partir de entonces y
hasta casi la entrada en órbita, la responsabilidad
recaía sobre la segunda fase. La tercera fase era
la encargada de poner en órbita la nave espacial
Apolo e impulsarla hasta la Luna.
Saturno V
MOTORES F-1 (5)
MOTORES J-2 (5)
FASE S-IC
FASE S-II
La segunda
fase (S-II)
se prepara
para su
acoplamiento
a la primera
fase (S-IC)
Acoplamiento de
la nave espacial
Apolo 11 al vehículo de
lanzamiento Saturno V
Poco después de la maniobra de inyección
translunar que situó la nave espacial Apolo
en su trayectoria hacia la Luna, tendrían
lugar las maniobras de transposición y
acoplamiento. Para llevarlas a cabo, un
astronauta debía separar el módulo de
control/auxiliar (MCA) del adaptador
que lo mantenía sujeto a la fase superior
de su vehículo de lanzamiento, darle la
vuelta y acoplar el morro al módulo lunar
(ML), separando entonces la nave espacial
resultante de la fase superior.
Transposición, acoplamiento
y extracción
MOTOR J-2
FASE DE DESCENSO DEL
MÓDULO LUNAR
DULO DE CONTROL
APOLO
FASE S-IVB
UNIDAD INSTRUMENTAL
FASE DE ASCENSO DEL
MÓDULO LUNAR
DULO AUXILIAR
APOLO
SISTEMA DE
ESCAPE PARA EL
LANZAMIENTO
Fase de ascenso
(5) del módulo
lunar en el área de
ensamblaje final,
sujeta a una grúa
rea
El MCA Apolo 11 se
transporta desde
el soporte de
trabajo para su
acoplamiento
El módulo de control/
auxiliar (MCA) se
separa del adaptador
El MCA se da la vuelta
y se prepara para
su acoplamiento al
módulo lunar (ML)
Tras el acoplamiento,
el MCA separa el ML
de la fase superior
del vehículo de
lanzamiento
DESPEGUE
EL SATURNO V SE
PREPARA EN EL
GIGANTESCO EDIFICIO
DE ENSAMBLAJE DE
VEHÍCULOS
LA PRIMERA FASE
SE DESPRENDE AL
TIEMPO QUE SE PONE
EN MARCHA LA FASE
S-II
SEPARACIÓN DE LAS
FASES S-II/S-IVB
Y PUESTA EN MARCHA
DEL MOTOR DE LA
FASE S-IV
GIRO DEL MCA
180°
INYECCIÓN
TRANSLUNAR
(ADELANTE)
DESCONEXIÓN DEL
MOTOR DE LA FASE
S-IVB
DESLASTRE DE
LA TORRE DE
ESCAPE PARA EL
LANZAMIENTO
SEPARACIÓN
DEL MCA DEL
ADAPTADOR DEL ML
DESCONEXIÓN DEL
MOTOR DE LA FASE
S-IVB
PUESTA EN MARCHA
DEL 2º MOTOR DE LA
FASE S-IVB
El viaje a la Luna
ACOPLAMIENTO
DEL MCA AL ML/
FASE S-IVB
PRUEBAS DE
ESTADO DE LOS
SISTEMAS/
PEODOS DE
ALIMENTACIÓN
Y SUEÑO/
PEODOS DE
TRANSMISIÓN
DE DATOS
TRANSFERENCIA DEL
COMANDANTE AL ML
INICIO DE
AVISTAMIENTOS
PARA LA
NAVEGACIÓN
PUESTA EN MARCHA
DEL MOTOR DE
DESCENSO DEL ML
PUESTA EN MARCHA
DEL MOTOR DE
DESCENSO DEL ML
PUESTA EN MARCHA
DEL MOTOR DEL MS
PUESTA EN MARCHA
DEL MOTOR DEL MS
SEPARACIÓN DEL
MCA/ML (3ª ÓRBITA)
TRANSFERENCIA DEL
PILOTO AL ML
DESCONEXIÓN
DEL MOTOR DE
DESCENSO DEL ML
ALUNIZAJE
SEPARACIÓN
DEL MCA DE LA
FASE S-IVB
Felix Stiessen
Con su pasión por la exploración espacial y la
construcción con LEGO® como elemento común, Valérie
Roche (alias Whatsuptoday) y Felix Stiessen (alias
Saabfan) trabajaron estrechamente en la creación
del impresionante modelo de la misión Apolo 11 para
LEGO Ideas.
“La parte más complicada fue el módulo de alunizaje. Yo
(Felix) intenté reducirlo a su mínima expresión (quería
que cupiese entre las piezas de medio cono, como se
aprecia en el modelo), sin perder los detalles estéticos.
Fue entonces cuando comenzamos a construir el cohete
a su alrededor. También queríamos que el cohete fuese
lo más sólido posible, así que Valérie incluyó dentro
columnas y vigas para aportar integridad estructural.
“En realidad, nos llevó bastante tiempo terminar el
modelo completo. Sucedía con frecuencia que uno de
nosotros abandonaba el proyecto durante un par de
semanas y lo recuperaba más tarde; no obstante, al ser
un proyecto de equipo, siempre había alguien que seguía
avanzando y motivaba al otro para continuar. En total,
diríamos que nos llevó alrededor de un año terminarlo.
“Nos sorprendió (y también nos alegró, por supuesto)
saber que nuestro modelo sería el próximo en
incorporarse a la colección LEGO Ideas. Lo que nos gusta
de la plataforma LEGO Ideas es la comunicación con
la comunidad y el apoyo que recibimos. Es fantástico
contestar los comentarios, leer las sugerencias y
mejorar el modelo poco a poco. Aunque, claro está, ¡la
oportunidad de diseñar tu propio set LEGO también es
realmente increíble!”.
Los fans diseñadores
Valérie Roche
Los diseñadores de LEGO®
Michael Psiaki, Carl Thomas Merriam y Austin
William Carlson son diseñadores oficiales de
LEGO® y grandes entusiastas de los temas
espaciales, así que todos estaban muy
interesados en formar parte de este proyecto. En
palabras de Michael:
“En realidad, no nos lo pidieron. Me emocioné
cuando escuché que el proyecto podía hacerse
realidad y enseguida se lo dije a Carl, porque
sabía que también es un fanático del espacio.
Decidimos que sería fantástico trabajar juntos al
ser un modelo tan grande, así que nos pusimos
en contacto con el equipo de Ideas acerca de
la posibilidad de contribuir al desarrollo del
proyecto”.
“Nos asombró lo grande que era el modelo real
y cómo podía separarse en todas las fases y
componentes. Este último aspecto fue muy
difícil de integrar en nuestro diseño final, porque
teníamos que asegurarnos de que el cohete fuese
lo suficientemente sólido cuando todo estaba
conectado, pero también fácil de separar”.
Carl Thomas Merriam (izquierda)
Michael Psiaki (centro)
Austin William Carlson (derecha)
26
1
3
4
2
LEGO.com/brickseparator
27
1
2
3
4
5
6
97
8 10
28
11
12
29
2x
1
1x
2
4x 4x 4x
3
1
1 2
4x
30
4x
4
4x 4x
5
4x 4x 4x
6
1 2
4x
31
1x 1x
7
1x 1x
8
32
1x 4x
9
4x 4x
10
1
2
4x
33
2x
11
1x 1x
12
34
2x
13
2x
2x
14
2x
2x
35
2x
2x
2x
2x
15
1
2
3
2x
36
2x
16
1x
17
2x
18
8x
19
8x
20
4x
21
37
1x
22
23
4x
24
38
4x 4x
26
4x
27
2x
28
4x 4x
29
1x 4x
25
4x
39
2x 2x
30
2x 1x
31
2x 1x
32
4x 4x
33
4x
40
2x 2x
34
2x 1x
35
41
1x 1x 4x
36
1 2 3
42
37
43
4x
2x
38
2
44
2x 1x 1x
39
1x 1x 1x 1x
40
2x 3x 1x
41
1x 1x
42
45
1x
43
1x 2x
1x 1x
44
46
6x
45
1x
46
47
2x 2x
47
48
4x
48
49
49
1x
1x
50
1x
51
1x
52
3
4x
50
2x
53
9x 1x
54
4x
51
55
52
4x 4x 8x 8x
56
1 2 3
4x
1 2
4x
53
4x 4x 4x
57
1 2
4x
54
2x
58
55
8x
59
8x
57
4x
61
58
8x
62
59
4x
63
4
60
2x
1x 2x
64
1x 1x
65
1x 1x
66
61
1x 1x
67
1x
1x
1x
68
3x
69
2x
196
3x
6199668
35x
306201
2x
4518400
59x
614101
4x
6178492
12x
459901
1x
6073345
2x
302401
2x
6054551
7x
4504369
4x
300501
3x
307001
6x
403201
1x
4649167
5x
6093053
4x
6069002
9x
605 7414
12x
6146215
112x
241201
7x
6173116
11x
306901
4x
4121932
8x
4222017
4x
302201
52x
6047220
12x
306801
4x
6055883
34x
6046979
8x
362301
24x
4249112
9x
6116602
148x
6132212
4x
6199669
4x
619967 1
4x
6199672
4x
6199673
2x
383901
4x
243101
1x
4515347
1x
6108662
4x
302001
8x
4560178
4x
4629916
2x
6081986
4x
6053026
22x
663601
4x
623901
4x
6199652
4x
6199662
4x
4160101
12x
4215470
10x
4513990
5x
4181142
4x
346001
4x
416201
1x
6201676
2x
6096681
6x
44 7701
4x
4520947
8x
6024495
4x
4159 279
14x
6117975
11x
4114306
2x
4118790
1x
4666999
12x
4113233
6x
6123812
40x
4113988
2x
4125217
1x
4143409
4x
6072998
4x
4558886
10x
302124
2x
6056234
19x
306226
8x
614126
7x
6167933
10x
6066102
2x
4504382
4x
300 526
20x
6157554
2x
403226
13x
4121715
4x
6069000
11x
306926
4x
4121966
4x
6114987
12x
30232 6
4x
6000650
4x
302226
24x
6053077
4x
4143751
5x
6130007
3
1x
6130009
7
8x
4142865
4x
393721
4x
6029946
42x
6001806
12x
4534648
16x
6105976
2x
6061711
1x
4526119
1x
4610843
4x
4143005
71x
302323
1x
4514553
17x
302023
6x
6186296
3x
366623
2x
346023
12x
6171814
4x
6029947
4x
242024
8x
6196217
1x
4500978
4x
4163904
4x
362326
48x
6147790
2x
302126
8x
4613153
4x
243126
1x
4143243
2x
663626
4x
4160130
2x
416226
1x
303426
1x
6074954
6x
6000071
4x
6073022
4x
4107758
5x
370726
8
1x
6203937
196


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lego 21309 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lego 21309 in the language / languages: All languages as an attachment in your email.

The manual is 33,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info