821319
43
Zoom out
Zoom in
Previous page
1/45
Next page
42
DE, CH, AT
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
ASSEMBLY INSTRUCTION | 4
STEP 6
STEP 7
AssemblyInstruction
Attach one bracket piece (2) to the two brace rings
(1). Secure the bracket to each brace ring using the
8x screws (A) with the 8x dome-headed nuts (B).
Continue to attach the other brackets to the brace
rings by aligning screw holes, and using the screws
(A) and dome headed nuts (B). Please reference the
above diagram.
On the side, add the firebox (5), charcoal plate (4)
and cooking grill (3) inside of the Kamado Please
reference the diagram below.
The Kamado Grill is now ready to use. Please ensure that grill
curing instructions are read thoroughly prior to use.
When the grill is securely placed on the stand,it
is recommended to place a level on the cooking
grill to ensure there is a flat cooking surface
Place the Kamado Grill on the stand with the
bottom vent facing to the front of the stand,
allowing the vent to open and close without
any interruption
To attach the handle (7) to the lid of the Kamado
Grill (6), start by aligning the bolt holes of the
handle to pre-installed bolts on the lid. Secure
the handle (7) with the 4x pre-attached dome headed
nuts .
MONTAGEZEICHNUNG
SCHRITT 1
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
ASSEMBLY INSTRUCTION | 4
STEP 6
STEP 7
AssemblyInstruction
Attach one bracket piece (2) to the two brace rings
(1). Secure the bracket to each brace ring using the
8x screws (A) with the 8x dome-headed nuts (B).
Continue to attach the other brackets to the brace
rings by aligning screw holes, and using the screws
(A) and dome headed nuts (B). Please reference the
above diagram.
On the side, add the firebox (5), charcoal plate (4)
and cooking grill (3) inside of the Kamado Please
reference the diagram below.
The Kamado Grill is now ready to use. Please ensure that grill
curing instructions are read thoroughly prior to use.
When the grill is securely placed on the stand,it
is recommended to place a level on the cooking
grill to ensure there is a flat cooking surface
Place the Kamado Grill on the stand with the
bottom vent facing to the front of the stand,
allowing the vent to open and close without
any interruption
To attach the handle (7) to the lid of the Kamado
Grill (6), start by aligning the bolt holes of the
handle to pre-installed bolts on the lid. Secure
the handle (7) with the 4x pre-attached dome headed
nuts .
SCHRITT 2
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
ASSEMBLY INSTRUCTION | 4
STEP 6
STEP 7
AssemblyInstruction
Attach one bracket piece (2) to the two brace rings
(1). Secure the bracket to each brace ring using the
8x screws (A) with the 8x dome-headed nuts (B).
Continue to attach the other brackets to the brace
rings by aligning screw holes, and using the screws
(A) and dome headed nuts (B). Please reference the
above diagram.
On the side, add the firebox (5), charcoal plate (4)
and cooking grill (3) inside of the Kamado Please
reference the diagram below.
The Kamado Grill is now ready to use. Please ensure that grill
curing instructions are read thoroughly prior to use.
When the grill is securely placed on the stand,it
is recommended to place a level on the cooking
grill to ensure there is a flat cooking surface
Place the Kamado Grill on the stand with the
bottom vent facing to the front of the stand,
allowing the vent to open and close without
any interruption
To attach the handle (7) to the lid of the Kamado
Grill (6), start by aligning the bolt holes of the
handle to pre-installed bolts on the lid. Secure
the handle (7) with the 4x pre-attached dome headed
nuts .
SCHRITT 3
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
ASSEMBLY INSTRUCTION | 4
STEP 6
STEP 7
AssemblyInstruction
Attach one bracket piece (2) to the two brace rings
(1). Secure the bracket to each brace ring using the
8x screws (A) with the 8x dome-headed nuts (B).
Continue to attach the other brackets to the brace
rings by aligning screw holes, and using the screws
(A) and dome headed nuts (B). Please reference the
above diagram.
On the side, add the firebox (5), charcoal plate (4)
and cooking grill (3) inside of the Kamado Please
reference the diagram below.
The Kamado Grill is now ready to use. Please ensure that grill
curing instructions are read thoroughly prior to use.
When the grill is securely placed on the stand,it
is recommended to place a level on the cooking
grill to ensure there is a flat cooking surface
Place the Kamado Grill on the stand with the
bottom vent facing to the front of the stand,
allowing the vent to open and close without
any interruption
To attach the handle (7) to the lid of the Kamado
Grill (6), start by aligning the bolt holes of the
handle to pre-installed bolts on the lid. Secure
the handle (7) with the 4x pre-attached dome headed
nuts .
SCHRITT 4
Der Kamado-Grill kann nun verwendet werden.
Stellen Sie jedoch bitte sicher, dass Sie vor der
Verwendung diese Gebrauchsanweisung sorgfältig
gelesen haben.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leen Bakker 52401058 Patton at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leen Bakker 52401058 Patton in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info