733407

Lavorwash STM 160 Kit 2 Manual

11
Zoom out
Zoom in
Previous page
1/136
Next page
EN
11
correctly, that is to say without any water
leak.
> SWITCHING OFF
See fig.
CARE AND MAINTENANCE
See fig.
The unit is maintenance-free.
XX WARNING: the machine shall be
disconnected from its power source, by
removing the plug from the socket-
outlet, during cleaning or maintenance
WARNING: Do not spray the appliance
with water and do not use detergents or
aggressive solvents. Machine could be
damaged.
·
Clean the exterior part of the machine with a dry
cloth.
> STORAGE
See fig.
· Move the machine only by grasping the
carrying handle
· Store the appliance and the accessories in a
frost-safe room.
TROUBLESHOOTING
Appliance does not work
· Check whether the voltage shown on the
rating plate corresponds to that of the power
source.
· Check the connector cable for damage.
Appliance does not reach operational pressure
· Vent the appliance: allow the pump to
operate without the high-pressure hose until
water appears at the high-pressure outlet
without any more bubbles. Then reattach
the high-pressure hose.
· Clean the strainer in the water connection.
· Clean the filter placed inside the hose
coupling (if set)
· Check the inlet water flow rate.
· Check all inlet pipes to the pump for leaks or
blockage.
Strong pressure fluctuations
· Clean the high-pressure nozzle. Remove dirt
from the nozzle hole with a needle and then
rinse out with water from the front.
Pump leaks
· 10 drops per minute are permissible. In the
case of more serious leakage, you should
contact the authorized customer service.
Replacement parts
· Use only original spare parts or spare parts
suggested by the manufacturer.
WARRANTY CONDITIONS
All our machines are subjected to strict tests
and are covered against manufacturing de-
fects in accordance with applicable regula-
tions. The warranty is effective from the date
of purchase.
The following are not included in the war-
ranty: - Parts subject to normal wear. - Rub-
ber parts, charcoal, filters and the accessories
and optional accessories. - Accidental damage,
caused by transport, neglect or inadequate
treatment, incorrect or improper use and in-
stallation failing - The warranty shall not cover
any cleaning operations to which the opera-
tive components may be subjected, such as
clogged nozzles and filter blocked due to lime-
stones. This machine is intended to be used for
domestic and hobby work: the warranty does
not cover any other different kind of use.
DISPOSAL WEEE
As the owner of electrical or electronic
equipment, the law (in accordance
with the EU Directive 2002/96/EC of
27 January 2003) prohibits you from
disposing of this product or its electrical / elec-
tronic accessories as municipal solid waste and
obliges you to make use of the appropriate
waste collection facilities.
The product can be disposed of by returning it
to the distributor when a new product is pur-
chased. The new product must be equivalent
to that being disposed of.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lavorwash STM 160 Kit 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lavorwash STM 160 Kit 2 in the language / languages: All languages as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info