495496

Lavorwash Silversteam Manual

25
Zoom out
Zoom in
Previous page
1/40
Next page
56
25
Maintenance
Caution!
• Before any maintenance or cleaning, unplug the machine.
• Do not empty the machine as long as there is hot water inside the boiler.
•In order to avoid formation of scale, it is recommended top fill the boiler with water and empty
it once a month (the machine can be emptied by setting it vertical).
• If the machine is to be kept idle for long periods of time, the boiler shall have to be emptied.
• Before putting away the machine and the iron, let them always cool down.
How to store the steam cleaner
• Store the machine in vertical position and use the cable
winder (optional).
Extract the cable winder by pulling downwards.
Insert the hoses into their seats and wind the cable
onto the outward wings. the cable can be rolled
even without fitting the hoses.
Cleaning
• Clean the machine enclosure with a wet cloth
Don't use any solvents, they may damage the machine
plastic components.
•Every now and then clean the iron plate with a product
suitable for metals. Then, run a dry cloth over it.
• Clean the machine accessories only with water.
• Let the clean brushes dry, with the bristles turned
upwards, to avoid any deformations.
Work with the steam cleaner
Warning:
• When you begin cleaning or ironing, or after a long pause, it's advisable to spray a little steam
on a cloth, to eliminate any water residue from the steam hose.
• The cleaning action is determined by the steam intensity and not by the pressure exerted on
the accessory.
Set the steam intensity by the steam regulator (if the machine is provided withit).
Push the steam activating button (15) on the steam nozzle handle.
Direct the steam jet towards the surface to be cleaned.
Run the scrubbing brush uniformly over the surface
If dirt is hard to eliminate, scrub just a little without pressing on the brush.
Collect dissolved dirt with a cloth.
Table:
steam intensity recommended
(model with steam regulation)
Degree of dirt
Dirt very easy to remove
Dirt easy to remove
Dirt hard to remove
Steam intensity
(optional)
1-2
3-4
5
Conexión de la limpiadora a vapor
¡Atención!
• Conectar la máquina sólo si la tensión de la red eléctrica se corresponde con la tensión nominal
indicada en la placa de características de la máquina.
• El interruptor principal (4) y el interruptor para el calentamiento (5) tienen que estar apagados.
• El cable de alimentación (7) no debe estar estropeado.
• El depósito del agua debe contener una cantidad adecuada de agua (como mínimo 0,5 litros).
• El tubo flexible tiene que estar empalmado con el accesorio correspondiente.
• No se debe impedir la salida del vapor por la tobera correspondiente.
Apretar el interruptor principal (4).
El piloto se enciende con el color naranja (4/B).
Apretar el interruptor para el calentamiento (5).
El piloto se enciende con el color verde (5/B).
La máquina está encendida.
El agua es calentada y se crea vapor.
Cuando se enciende el piloto verde (3), la máquina está lista para ser usada.
Verter el agua en la caldera
¡Atención!
• Durante el funcionamiento ¡no abrir el tapón (2) de la caldera!
• El tapón (2) de la caldera puede venir equipado con una seguridad adicional (opción) que
impide el desenrosque del tapón cuando hay vapor dentro de la caldera.
Advertencia:
• Cuando se ha terminado la reserva de agua, se enciende el piloto del nivel del agua (6) de
color naranja.
Llenado
Apagar el interruptor del calentamiento (6).
Colocar la tobera del vapor en un fregadero.
Apretar la palanca del vapor (15) situada en la empuñadura y mantenerla apretada
hasta agotar el vapor.
Apagar el interruptor principal (4).
Desconectar la clavija (7) de la toma de corriente.
Dejar que la máquina se enfríe.
Apretar el tapón (2) de la caldera hacia abajo y al mismo tiempo girarlo en sentido
contrario al de las manecillas de un reloj hasta desenroscarlo completamente.
Verter el agua.
Poner el tapón (2), apretarlo hacia abajo y al mismo tiempo girarlo en el sentido de las
manecillas de un reloj hasta enroscarlo completamente.
Desconectar la limpiadora a vapor
Apagar el interruptor para el calentamiento (5) y el interruptor principal (4).
Girar el regulador de intensidad del vapor (9) (opción) poniéndolo en la posición 0.
Desconectar la clavija (7) de la toma de corriente.
Dejar que la máquina se enfríe.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lavorwash Silversteam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lavorwash Silversteam in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info