495521
9
Zoom out
Zoom in
Previous page
1/36
Next page
1.2.7.3. Automatic Water Entry (A.E.A)
The Automatic Water Entry system is for checking the
b
oiler level.
It is composed of:
- probe inserted in the boiler (A), composed of a stain-
less steel rod;
- electronic control unit (B);
- a pump which, along with the AEA solenoid valve,
allows water to flow into the boiler.
- AEA solenoid valve.
The electronic control unit controls the level of water in
the boiler. When the level drops, the contact with the
probe is broken. The control unit sends an impulse to
the inlet solenoid valve and to the motor pump, which
are activated to restore the normal level of water in the
boiler.
To avoid possible flooding due to machine malfun-
ctions or leaks in the hydraulic circuit, the electronic
control unit includes a timing device that cuts off auto-
matic filling after a maximum operating time of 120
seconds.
B
1.2.7.4. Volumetric dosing device
The volumetric dosing device installed on the EVD
e
lectronic machines serves the purpose of measuring
the quantity of water sent to the espresso delivery
group.
The dosing device generates an electrical impulse
which is sent to the electronic control unit. This impul-
se is read by the control unit and memorized during the
programming of the dose.
The flashing of the LED (1) indicates that the electrical
impulse has been sent from the dosing device to the
control unit.
1
1.2.7.5. Checking boiler temperature/pressure
The temperature (and as a result the pressure) in the
boiler is controlled by a special NTC sensor located on
the boiler (X).
This sensor constantly sends information to the elec-
tronic control unit, which in turn activates or deactiva-
tes the heating element by means of a power triac.
The default temperature is set in the factory at 120°C.
If you want to change this value, you can do so by
means of the procedure described in the chapter
“Programming of boiler temperature”.
Manual code 10066574 / Rel. 0.00 / March 2009
Maintenance manual for technical assistance - LB 2800 - LB 2810
5
A
X
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lavazza LB 2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lavazza LB 2800 in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info