16
When the network provider icon appears on the standby screen, you can call out or
answer calls. The indicator on the upper right part shall show the signal strength.
Quality of connection will be greatly influenced by obstructions. So movement in a
small range may effectively improve the quality of connection.
Make Domestic Calls
Use virtual keyboard to enter phone numbers and then press Dial icon to call. If you
need to change the phone number, please press the delete key on the touch screen
to delete. When the call is answered, the screen shall show the connection status.
Call Extension Phone
Some of the extension phones can't be directly connected to. Use the virtual
keyboard, enter switchboard number, open the option menu and choose " Add
2-sec pause", and then dial the extension phone number.
Type in as follows to call extension phone:
Zone description > switchboard number > Add 2-sec pause > extension phone
number › call
Make International Calls
If you need to make an international call, do a long press on the 0 key on the virtual
keyboard until there appears the sign "+" for international call prefix, which helps
you call from any country even if you don't know the international call prefix of that
country.
You can make an international call according to the following typing order: + ›
country code › complete phone number › dialing icon (type in the prefix code, and
then continue to enter the country code and complete phone number). Country
code usually follows conventional practice: German is 49, Britain 44, Sweden 46
and so on.
When making international phone calls, the "0" in the city code should be emitted.
Make Listed Calls
Every dialed and received phone number is recorded in the call history list.
Recently dialed, answered and missed phone numbers are chronologically (newest
to oldest) listed in the "all" log. You can also choose and check missed, answered
and dialed list according to your need.
Listed phone numbers can be called out by pressing the respective log.
Press the small icon on the right side to enter the details interface of the log. In the
