488184
11
Zoom out
Zoom in
Previous page
1/15
Next page
Maintenance
7
Storage of the board
1. Turn the iron and boiler switches to the off position.
Unplug system.
2. Take the monotube out of cord-holder.
3. Remove cord-holder from ironing board.
4. Place iron in basket.
5. Slide basket under the board. You can store the
system even if the iron is still hot.
6. Lift ironing board by both ends, weight of generator
will automatically fold the system.
7. You can leave water in generator until next use.
Cleaning the iron
Rinsing the boiler - cold appliance!
Risk of burns! Make sure the appliance is cold before rinsing. After unplugging, allow the appliance to
cool for at least 2 hours before rinsing.
To prolong the efficiency of the steam generator and avoid calcium deposits you must rinse the steam gen-
erator regularly.
Use our Polyfer cleaning cloth which you can obtain from your supplier mak-
ing sure you follow the written instructions. Clean the soleplate more often if
you use starch when ironing (even if the starch deposit is not visible).
Please refer to the instructions below for rinsing.
1. Disconnect the power supply.
2. Allow the appliance to cool for at least 2 hours.
3. Fix the board in the highest position.
4. Place the drain receptacle under the boiler.
5. Unscrew the drain cap.
6. Unscrew the filling cap.
7. Pass the contents of a bottle of tap water through the boiler to
remove any scale.
8. Repeat this operation until the water coming out of the boiler is
free of residues.
9. Screw the drain cap back on.
10. Fill up with water.
11. Screw the filling cap back on.
N.B.: If no water comes out of the drain opening this should be
unblocked with a pointed instrument.
WARNING: Risk of splashes
Calcium content Number of hours use between 2 rinses
Weak, zero or with the LauraStar Aqua water-filter pot 20
Average 15
High 10
English
MagicEVO2-PreEVO2 Anglais.qxp 20.5.2009 9:53 Uhr Seite 9
Why have blowing and vacuum?
Hints on usage
8
Angora / Wool
Steam iron about 10 cm from the surface of the material, in order not to damage it.
Shake the garment by hand so that it regains its normal shape.
Silk
Vertical removal of creases
Hang the garment on a coat
hanger or hold it up.
With a sweeping movement from
top to bottom lightly touch the
material while giving short bursts
of steam.
Note: It is easy to remove creas-
es from most materials, except
for cotton, linen and some silks.
If it is difficult to remove the
creases from a material, iron it as
normal on the ironing board.
Special materials
Velvet
Corduroy
Jersey
If you are not using a
Softpressing soleplate, steam
iron 2-3 cm from the surface of
the material, then finish by hand.
Steam iron silk in the normal
way.
In the case of dark silk you are
advised to use a Softpressing
soleplate.
Perfect ironing requires steam to be injected into the fabric. This is a requirement for the complete
removal of creases. Do not continually inject steam into fabric: press the steam control button intermit-
tently. For this the LauraStar
Magic Evolution / II system uses the same methods as professional dry
cleaning: vacuum and blowing.
To improve the quality of ironing and increase the autonomy of your appliance, steam iron the material first
and then re-iron it without steam, in order to dry the material.
blowing
vacuum
Velvet
Back Buttons Welt Legs Inside Sleeves Bottons Top Pleats
and collar and creases and lining and collar
English
MagicEVO2-PreEVO2 Anglais.qxp 20.5.2009 9:53 Uhr Seite 10
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laurastar Magic Evolution II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laurastar Magic Evolution II in the language / languages: English as an attachment in your email.

The manual is 4.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Laurastar Magic Evolution II

Laurastar Magic Evolution II User Manual - German - 14 pages

Laurastar Magic Evolution II User Manual - Dutch - 15 pages

Laurastar Magic Evolution II User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info