Manual Laurastar Laurastar Lift (page 5 of 82) (English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish)

532884

Zoom out

Zoom in

1/82

- 5 - - 6 -

Steam principle

Perfect ironing requires diffusion of steam across the fabric, in order to

relax the bres, and drying to x them in place. Creases can only be

completely removed if these conditions are present. For best results, rst

iron the item with steam and then iron it again without steam, thereby

enabling the iron to dry the fabric.

Two steam modes

For the best possible ironing result, we offer two modes of steam ironing:

• STEAM mode (12): by pressing on one of the 2 STEAM buttons

(12), you release a jet of steam from the iron. Press several times for

multiple jets of steam. B

• PULSE mode (13) (only on certain models): activate the PULSE

mode (13) by setting the button to ON, then hold down the STEAM

button (12) to obtain continuous small jets of steam. To deactivate

PULSE mode, set the button to OFF. You can then use STEAM mode

normally. C

• To stop the steam, release the STEAM button (12).

Advice: to improve the quality of ironing and increase the autonomy of

your appliance, iron the fabric once using steam, then a second time

without steam to dry the fabric.

Protective soleplate (10)

The protective soleplate is indispensable for dark-coloured fabrics

that can become shiny and delicate fabrics such as silk, which have a

tendency to stick to the iron. How to use the protective soleplate:

• First place the point of the iron (2) at the front of the protective soleplate

(10) and lower the iron to x it in place in the soleplate. D

• Wait approximately 1 minute for the soleplate to reach the correct

temperature.

Using the soleplate

Indication on

the clothing Material Protective soleplate

Extremely delicate man-made fabrics, e.g.:

synthetic velvet, Alcantara® (synthetic suede),

“stretch” sports clothing, microfibre fabrics

polyamide/polyester, viscose, polyurethane

with

EWool, silk, synthetic fabrics with

FCotton, linen, aramide without

CAUTION: Always ll the water reservoir completely for best

performance.

NOTICE: Operating the appliance without water can damage the

appliance and will void any limited warranties provided with

your appliance.

Filling

• Lift the cover of the water reservoir and remove the reservoir by

pulling on the cover. Insert the lter cartridge (17) provided and ll

with tap water. A

• Replace the reservoir (4) by lifting the cover, then close.

Switching on your appliance

• Plug in the iron.

• Press the On/Off switch (7); the white indicator light will ash for

3-6 minutes. B

• When the white indicator light stops ashing, the appliance is ready.

NOTE: For your comfort and safety, your Laurastar steam station

will switch off after 10 minutes of not being used.

NOTE: Before ironing, or after an extended break, press the iron’s

steam button 2 or 3 times, while pointing it away from the clothes.

This will release any condensation from the iron and prevent

water marks on the clothes.

WARNING: Do not point the iron at people or pets while

using vertical steam.

Start up

Ironing

Setting the temperature of the iron

(only available with certain models)

Set the thermostat (11) to • • or • • •. A

NOTE: After changing the temperature setting, it takes

approximately 2 minutes before the new temperature is stabilised.

3-6 mins

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Laurastar Laurastar Lift in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 69.01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Laurastar Laurastar Lift

Laurastar Laurastar Lift User Manual - Dutch - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Laurastar Laurastar Lift Manual

Product: