646836
14
Zoom out
Zoom in
Previous page
1/20
Next page
14
ENGLISH
ZipLevel
CAL
The appliance has been calibrated at the factory. Please only calibrate, in
case the measuring results are wrong or the letters ‘CALare blinking on
the display. A benchmark of 1.219 m above the base unit is important for
the gauging. It will be best to use the sensing device to gauge the app-
liance (only with ZipLevel Pro 35).
Calibrating the ZipLevel:
1) Put the basic unit on its back onto a level surface and switch the
measuring module on.
2) Lay the measuring module on its base or back next to the basic unit.
Press the CAL-key for 2 seconds.
3) When
(0) is blinking on the display, shortly press CAL.
4) When
(1.219) is blinking on the display, raise the measuring module
to a height of 1.219 m above the basic unit and press CAL again. The
measuring module has to be held stable during the process. The sen-
sing device (only with ZipLevel Pro 35) or a measuring marking should
be used as a calibration device.
5) When the display stops blinking and shows 1.219 m the appliance is
recalibrated.
Advice: You can leave the calibration function at any time without calibra-
ting! For that you press the CAL-key for 2 seconds.
ENGLISH
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner ZipLevel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner ZipLevel in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Laserliner ZipLevel

Laserliner ZipLevel User Manual - German - 20 pages

Laserliner ZipLevel User Manual - Dutch - 20 pages

Laserliner ZipLevel User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info