646835

Laserliner WoodTester Compact Manual

8
Zoom out
Zoom in
Previous page
1/100
Next page
08
GB
6
7a
7b
dry
moist
wet
dry moist wet
trocken
feucht
nass
If a measurement should produce no change of the LEDs, it
is possible that the measured material is too dry. Perform a
self-test of the device with the protective cap to make sure
the device is in good working order.
!
If a measurement for a group B wood is now made, the material‘s
moisture in % will be displayed in the lower scale. In this case, the
right-most illuminated LED (regardless of colour) and the colour-scale
beneath it are used to determine if the wood is to be classied as „dry“,
„moist“ or „wet“. Evaluation is now based on the lower colour scale.
Green = dry, yellow = moist, red = wet.
Example shown: 23%, red section of the lower scale = wet.
Wet/dry LED indicator for group B
After switching the device on, all 12 LEDs will illuminate briey.
Thereafter, the rst green LED will blink continuously. The device is
now ready to use. If a measurement for a group A wood is made, the
material‘s moisture in % will be displayed in the upper scale. The LED
display bar becomes larger, from left to right, with increasing moisture
content. The 12-position LED display is subdivided into 4 green (dry),
3 yellow (moist) and 5 red (wet) segments. The moisture content of
wood can be determined both from the percentage gure as well as
from the LED colour. Example shown: 13%, green LED = dry.
Wet/dry LED indicator for group A
The location to be measured should
be untreated, free of knots, dirt and
resin. Measurements should not be
made on the end faces of wood
because these areas dry particularly
quickly such that they produce
incorrect measurement results.
Determining wood moisture
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner WoodTester Compact at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner WoodTester Compact in the language / languages: All languages as an attachment in your email.

The manual is 12,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info