Manual Laserliner SuperSquare-Laser 4 (page 8 of 56) (All languages)

646808

Zoom out

Zoom in

1/56

Wall applications

Mount the device on the wall for horizontal and vertical

levelling. Then align the device with the vials.

Mounting on the wall

1. Place device on the wall.

2. Push the special pins through

the appropriate holes.

Subject to technical changes 05.2016

Technical Data

Angle accuracy ± 0.5 mm / 1 m

Operating range

(depending on room illumination)

15 m

Laser wavelength 635 nm

Laser class /

line laser output power

2 / < 1 mW

Power supply / Operating time 2 x 1,5V AA / 15 h

Operating temperature 0°C...+ 50°C

Storage temperature -10°C...+ 70°C

Dimensions (W x H x D) 200 x 48 x 100 mm

Weight (incl. batteries) 240 g

Regularly check the calibration before use, after

transport and after extended periods of storage.

Fix a plumb bob with a line at least 2.5 m in length on the

wall, making sure that the bob can swing freely. Switch on the

laser, direct the lines at the plumb and align the bubble levels (2).

The precision is within tolerance if the deviation between the

laser line and plumb line is not greater than 0.5 mm / 1 m.

Checking the vertical line

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner SuperSquare-Laser 4 in the language / languages: All languages as an attachment in your email.

The manual is 0,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Laserliner SuperSquare-Laser 4 Manual

Product: