646094

Laserliner SmartCross-Laser Manual

5
Zoom out
Zoom in
Previous page
1/68
Next page
SmartCross-Laser
5
1
+
+
–
–
LASER LASER LASER LASER
6
5
4
3
2
1
2
GB
Read the operating instructions and the enclosed brochure „Guarantee and
additional notices“ completely. Follow the instructions they contain. Safely
keep these documents for future reference.
!
The automatic cross-line laser for aligning tiles, wall studding, windows,
doors etc.
General safety instructions
Caution: Do not look directly into the beam. Lasers must be kept out of reach of children.
Never intentionally aim the device at people. This is a quality laser measuring device and is
100% factory adjusted within the stated tolerance. For reasons of product liability, we must
also draw your attention to the following: Regularly check the calibration before use, after
transport and after extended periods of storage. We also wish to point out that absolute
calibration is only possible in a specialist workshop. Calibration by yourself is only approxi-
mate and the accuracy of the calibration will depend on the care with which you proceed.
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 650 nm
EN 60825-1:2007-10
Always turn off all lasers and latch the pendulum in place before transporting,
ON/OFF switch in its „OFF“ position!
!
Inserting batteries
Open the battery compart-
ment and insert batteries
(2 x type AA) according to
the symbols. Be sure to pay
attention to polarity.
Horizontal and vertical levelling
Release the transport restraint, set the ON/OFF switch to „ON“. The laser cross will
appear. The laser lines can be switched individually with the selection button.
The transport restraint must be released for horizontal and vertical levelling. The
LED shows a permanent green light. The laser lines × ash and the LED lights red
as soon as the device is outside the automatic levelling range of 5°. Position the
device such that it is within the levelling range. The LED switches back to green
and the laser lines stop × ashing (steady light).
!
Laser line selection button
LED levelling
red: levelling off
green: levelling on
Battery compartment (backside)
ON / OFF switch,
transport retainer
Laser output windows
1/4“ tripod threads (bottom)
1
2
3
4
5
6
Manual_SmartCross-Laser_Rev.0213.indd 05 19.02.13 07:41
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner SmartCross-Laser at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner SmartCross-Laser in the language / languages: All languages as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info