646147
31
Zoom out
Zoom in
Previous page
1/96
Next page
SPECIAL FUNCTIONS
Capture Function (HOLD):
The Capture function is used to obtain a single reading and keep it
displayed. This may be useful when the unit may not be visible and grade
information needs to be obtained.
When in the laser beam and power on, momentarily press the Power/Capture switch.
The current elevation reading will be saved. A flashing display will confirm the reading
has been captured. Press any switch to return to normal operation.
When out of the laser beam and power on, momentarily press the Power/Capture
switch. A short intermittent beep and ‘WAIT’ displayed on the LCD confirm the
Capture mode. (The beeper will turn on to Low if turned off.) Place the receiver in the
beam. The beeper will chirp rapidly after approximately 5 seconds confirming beam
capture. A flashing display will also confirm the reading has been captured. Press any
switch to return to normal operation.
Calibration Mode:
Pressing the Power and Accuracy switches together when the unit
is off enables entry into a laser calibration accuracy mode. This
mode is not marked on the unit.
This accuracy is designed to be used when calibrating a laser. It is not recommended
for field use.
Calibration mode will be confirmed on the LCD by the accuracy indicators without
the on-grade bar.
Press any key or cycle power to exit the calibration mode and return to the previously
stored accuracy setting.
ENGLISH
SensoMaster 400
ENGLISH 31
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner SensoMaster 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner SensoMaster 400 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info