646147
24
Zoom out
Zoom in
Previous page
1/96
Next page
L
Operation of SensoMaster 400
INSTALLING THE BATTERIES
1. Open the battery door using a coin or similar pry
device to release the battery door tab.
2. Insert two AA batteries noting the plus (+) and
minus (-) diagrams inside the battery housing.
3. Close the battery door. Push down until it „clicks“
into the shut position.
L
Note:
Do not expose batteries to excessive heat such as sunshine, fire, etc. Dry batteries must
not be recharged. Used batteries must not be disposed of as household waste. Please
take them to a collection point for used batteries or for special waste. Ask your local
authority for further details. Batteries with the recycling symbol can also be returned to
our dealerships or to our Technical Service.
PRIMARY SWITCH FUNCTIONS
1. Power Switch:
Press the power switch to turn power ON. All
LED‘s, the LCD, and the beeper will come on
momentarily. CAL will be displayed and LED‘s
sequenced as the unit goes through a
self-calibrating procedure for approximately
3 seconds.
Note:
Do not power up the unit in a laser beam or strobe. If detected, the unit will revert to
the previous calibration.
Press and hold the Power switch for 2 seconds to turn power OFF.
ENGLISH
SensoMaster 400
Deutsch 1
ENGLISH24
4
3
1
2
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner SensoMaster 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner SensoMaster 400 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info