646142

Laserliner Quadrum OneTouch Manual

19
Zoom out
Zoom in
Previous page
1/244
Next page
19
Quadrum OneTounch / Quadrum OneTounch Green
XY
± 5°
man
If the device has been placed on a surface with too much of a slope
(more than 5°), the prism head remains stationary and the laser starts
to flash. The device must then be placed on a more even surface.
!
auto/man function LED OFF: Automatic alignment
!
– The device levels itself automatically to within a range of ±5°. The laser
rotates and the tilt, X and Y LEDs flash during the set-up phase. When
levelling is complete, the tilt LED flashes rapidly and the X and Y LEDs are
permanently on. The laser rotates at maximum speed. Refer also to the
sections about "Sensor Automatic" and "ADS Tilt".
Horizontal levelling
– Horizontal: Position the device on a level surface or
on a tripod.
– Press the "ON/OFF" switch
auto
Slope function up to 5° – horizontal
This function deactivates the automatic sensor. To use the function, press the
auto/man button. The plus/minus buttons are used to re-adjust the slope by
means of a motor. In the process the X-and Y-axis can be adjust separately.
Refer to the illustrations below.
GB
Manual_QuadrumOneTouch_Rev.0211_DE_NO.indd 19 10.03.11 08:59
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner Quadrum OneTouch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner Quadrum OneTouch in the language / languages: All languages as an attachment in your email.

The manual is 4,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info