646105
14
Zoom out
Zoom in
Previous page
1/268
Next page
1 2
1.
6LR61 9V
2 sec
ON
2.
3.
3
OFF
1
3
2 sec
2
5
6
7
8
9
4
Function / Application
This material moisture measuring device operates in accordance with the resistance and capacitive
measuring principle. The capacitive measuring principle uses 2 conductive rubber contacts on the
underside of the device to determine the moisture-dependent dielectric permittivity of the material
and calculate the relative material moisture as a percentage based on internal material-dependent
characteristics. The resistance measuring principle determines the moisture-dependent conductivity
of the material when the test prods make contact with the material, compares the result against the
stored material-dependent characteristics and calculates the relative material moisture as a percentage.
The device is used to determine the moisture content in wood and building materials with the aid of the
corresponding measuring method. An additional pop-out sensor on the side of the device determines
the ambient temperature and relative humidity and calculates the resulting dew point temperature.
Read the operating instructions and the enclosed brochure „Guarantee and additional notices“
completely. Follow the instructions they contain. Safely keep these documents for future reference.
!
Automatic
switch-off after
2 minutes.
The integrated building materials characteristics correspond to the stated construction materials
without admixtures. Construction materials will vary from manufacturer to manufacturer, due to the
way in which they are produced. This is why, in the event of different product compositions or un-
familiar construction materials, a one-off comparative moisture measurement should be taken using
methods that can be calibrated (e.g. kiln-drying method). If different measured values occur, they
should either be viewed relatively or the index mode for moisture/drying behaviour should be used.
!
1 Test prods, resistance measurement
2 Rubber contacts, capacitive measurement
3 Pop-out sensor for measuring ambient
temperature and humidity
4 Battery compartment
5 Wet/dry LED indicator
6 Material selection
7 ON/OFF
8 Measuring mode selection
(resistance measurement, capacitive measurement)
9 LC display
14
GB
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner MultiWet-Master at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner MultiWet-Master in the language / languages: All languages as an attachment in your email.

The manual is 12,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info